View Single Post
Old 07-09-2019, 11:37 AM   #3
wlfpck   wlfpck is offline
 
Join Date: Mar 2018
Posts: 249
Replacing the Speedometer

This is the original post I made:

http://chinariders.net/showthread.php?t=21374

The one that I ordered for my Icebear Fuerza at the time. I ordered this because one of the turn signal lights doesn't work on the dash (even though the turn signals did). Also, I wanted to see what spare parts were available and if there were plug and play aftermarket replacement parts so that you didn't have to go through the dealerships.

https://www.amazon.com/Samdo-Univers...iglink28144-20

I needed something that would be plug and play. So after tons of research and pulling the headlight off to get to the wiring, that the Icebear had 3 plugs coming from the dash. Then doing some Googling, found this wiring diagram that explains what each wire is:



I ended up keeping the factory speedometer on the bike since it has the mileage on it. However, I did plug it in and check things like revs/rpm while the bike was in neutral. Confirming that it all worked, I put the original back on. Bike was not ridden with the new speedometer.
__________________
2020 Honda Grom
2017 Icebear Fuerza (Daix PMZ125-1) - Sold



Last edited by wlfpck; 01-13-2020 at 08:54 AM.
 
Reply With Quote