04-14-2020, 09:02 PM | #1 |
Join Date: Apr 2020
Location: Wonder Lake, Illinois
Posts: 4
|
Taotao Hellcat turn signal flasher location?
Hi, I recently bought a used Hellcat 125. All of the turn signals will light up but not flash. I assume the relay /flasher is bad. Can anyone tell me where it's located? I searched google and also here and can not find the information. I thought it would have been a common question. Thanks in advance for any help.
|
|
04-14-2020, 10:54 PM | #2 |
Join Date: Apr 2020
Location: Tacoma, Washington
Posts: 36
|
Not sure on the hellcat. My Vader’s was located behind the headlight fairing connected on the main wire harness. Should be the same for yours.
Cheers! |
|
04-14-2020, 11:18 PM | #3 |
Join Date: Apr 2020
Location: Wonder Lake, Illinois
Posts: 4
|
Thanks! I'll take a look tomorrow.
|
|
04-19-2020, 04:57 PM | #4 |
Join Date: Nov 2019
Location: Woodbridge VA
Posts: 60
|
If it is set up like my new 2020 Boom vader, remove the left side body panels and it is right in back of the spark control box. The little black about 1 inch by 1 inch looking box.
Carl |
|
04-20-2020, 06:01 PM | #5 |
Join Date: Apr 2020
Location: Wonder Lake, Illinois
Posts: 4
|
Thanks Carl. I found it. It is on the right side under the side panel. Several inches above and behind the starter motor. I'll post some pictures when I can just in case someone else is looking for the same information.
|
|
04-26-2020, 01:10 PM | #6 |
Join Date: Apr 2020
Location: Wonder Lake, Illinois
Posts: 4
|
Here's a couple pictures. Maybe they will help someone looking for the same thing.
|
|
04-26-2020, 11:33 PM | #7 | |
Join Date: Nov 2019
Location: Woodbridge VA
Posts: 60
|
flasher
Quote:
I see you hav a round one in your bike. Mine is a standard square box type. Carl |
|
|
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|