Genuine VM22 on Venom X20

Sebastian · 12-01-2021, 07:28 AM

I’m looking to mount a genuine Mikuni VM22 carburetor onto my Venom X20, however I’m finding it impossible to find an intake manifold that will fit. I’m sure most of you are familiar with the ”upgraded” intake that has a larger bore meant for a knockoff mikuni carb, but the bolt holes are vertically offset in relation to the bore. The Mikuni’s are not, they’re all in line. Am I crazy or is there not a suitable intake out there? Help me out please!

Falkon45 · 12-01-2021, 08:12 AM

can you post a picture of what you're talking about?

Bruces · 12-01-2021, 08:14 AM

Your engine is just a typical pit bike engine ,search google for pit bike manifolds and you will find something that will fit .There are many thousands to choose from .

4T_Goblin · 12-01-2021, 03:01 PM

I found one on Amazon for like $11 comes with gasket and spacer and bolts. Intake for vm22, 26mm. The gasket has the sleepy eye shape, so I bought some 26mm gasket that have the correct intake to head shape with the straight across bolt holes.

Doubledown · 07-30-2022, 10:39 PM

Quote:

Originally Posted by Sebastian

I’m looking to mount a genuine Mikuni VM22 carburetor onto my Venom X20, however I’m finding it impossible to find an intake manifold that will fit. I’m sure most of you are familiar with the ”upgraded” intake that has a larger bore meant for a knockoff mikuni carb, but the bolt holes are vertically offset in relation to the bore. The Mikuni’s are not, they’re all in line. Am I crazy or is there not a suitable intake out there? Help me out please!

Did you ever find a intake for this? I am running into the same issue. Every intake I find is with the off set bolt holes for the fake Mikuni, and of course when I try to refine my searches and add something like "genuine" or "real" Mikuni VM22 all the same knockoffs come up.
Thank you,

Falkon45 · 07-30-2022, 11:53 PM

Do you need one offset to the side, or straight?

Big Bird · 07-31-2022, 05:27 AM

Probably need to source it from xr/crf50 upgrades. The Japanese pitbikes are more likely to use genuine parts.

There is a china "24mm crf50" intake on ebay that looks like it's not off center. Hard to tell from the picks though. Otherwise I would think there would be something available from takegawa or something from the crf/klx pitbike websites. I noticed they also sell the knockoff 26mm vm22 also so gotta be careful.

Doubledown · 07-31-2022, 02:08 PM

Quote:

Originally Posted by Falkon45

Do you need one offset to the side, or straight?

Not Too sure on alignment, I ordered bd125-8 but it is not here yet. Just getting parts on order and want to do a legit Mikuni. From what I have seen with people adding the knock off kits it looks like its a 90 degree intake that goes straight forward on the bike.

I the issue with the real vs knock off alignment is in this video at 2:47 ( )

Falkon45 · 08-01-2022, 03:57 PM

https://wholesale-cycle.com/intake-m...eatured&page=2

this place might have something that can work.

12-01-2021, 07:28 AM	#1
Sebastian Join Date: Dec 2021 Posts: 1	Genuine VM22 on Venom X20 I’m looking to mount a genuine Mikuni VM22 carburetor onto my Venom X20, however I’m finding it impossible to find an intake manifold that will fit. I’m sure most of you are familiar with the ”upgraded” intake that has a larger bore meant for a knockoff mikuni carb, but the bolt holes are vertically offset in relation to the bore. The Mikuni’s are not, they’re all in line. Am I crazy or is there not a suitable intake out there? Help me out please!
	0

07-31-2022, 05:27 AM	#7
Big Bird Join Date: May 2020 Location: California Posts: 169	Probably need to source it from xr/crf50 upgrades. The Japanese pitbikes are more likely to use genuine parts. There is a china "24mm crf50" intake on ebay that looks like it's not off center. Hard to tell from the picks though. Otherwise I would think there would be something available from takegawa or something from the crf/klx pitbike websites. I noticed they also sell the knockoff 26mm vm22 also so gotta be careful. __________________ 2020 Boom Vader Gen 2 2019 CSC TT250 2021 Kayo Fox 70 Last edited by Big Bird; 07-31-2022 at 06:13 AM.
	0

12-01-2021, 08:12 AM	#2
Falkon45 Join Date: Aug 2020 Location: Savannah, Ga Posts: 760	can you post a picture of what you're talking about?
	1

12-01-2021, 08:14 AM	#3
Bruces Join Date: May 2018 Posts: 1,708	Your engine is just a typical pit bike engine ,search google for pit bike manifolds and you will find something that will fit .There are many thousands to choose from .
	1

12-01-2021, 03:01 PM	#4
4T_Goblin Join Date: Jun 2021 Posts: 256	I found one on Amazon for like $11 comes with gasket and spacer and bolts. Intake for vm22, 26mm. The gasket has the sleepy eye shape, so I bought some 26mm gasket that have the correct intake to head shape with the straight across bolt holes.
	1

07-30-2022, 11:53 PM	#6
Falkon45 Join Date: Aug 2020 Location: Savannah, Ga Posts: 760	Do you need one offset to the side, or straight?
	0

08-01-2022, 03:57 PM	#9
Falkon45 Join Date: Aug 2020 Location: Savannah, Ga Posts: 760	https://wholesale-cycle.com/intake-m...eatured&page=2 this place might have something that can work.
	0