![]() |
#1 |
Join Date: May 2008
Posts: 149
|
Oil level question
Ok, my question is simple so here it is. When I replaced my shipping oil with Shell Rotella T 30W I filled it until my view window was full. When the bike leans on the kick stand the window only have a little oil in it; when the bike is standing straight up the window is full, when the bike is running the oil level is just below the -L level.
Where is the proper level for each position? Thanks, Jay |
![]() |
![]() |
#2 |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
With the bike upright and engine off so that all the oil is in the the bottom it should be somewhere in the middle of the window.
Allen
__________________
You meet the nicest people on a Honda Clone. |
![]() |
![]() |
#3 |
Join Date: Jan 2007
Location: Northern Vermont, USA
Posts: 1,271
|
Kato is right on. It sounds like you may have a little bit too much in there. It'll probably just puke out the case vent tube. Next oil change, just put in one full quart of oil. That's all it needs.
__________________
First Chinabike: 2006 Roketa RSX200E Current Chinabikes: 2023 Titan DLX & 2022 Lifan KP Mini w/ 210cc BRT kit, 22 RWHP! |
![]() |
![]() |
#4 |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
I just use a qt too. Works fine. Easy measuring.
Allen
__________________
You meet the nicest people on a Honda Clone. |
![]() |
|
![]() |
![]() |
|
|