03-03-2011, 07:39 PM
|
#1 |
|
Join Date: Feb 2011
Location: Nova Scotia
Posts: 27
|
Gio X31 Rear Sprocket Replacement, suggestion??
I am looking for a 428 chain, 49 tooth sprocket, with enough material in the center to machine new holes, because the rear sprocket has bolt holes that are 68mm center to center, with a cut out of approx. 53mm.
Any ideas. I have access to some machines but I cannot machine a custom sprocket. |
|
|
|
|
|
|
Threaded Mode