|
05-09-2018, 09:51 PM | #1 |
Join Date: Feb 2018
Posts: 11
|
Hawk 250 Starter Oring
So I did a crankcase gasket on my hawk recently and accidentally messed up the oring on the cap that covers the starter gear on the engine. I went to hardware store and they don't have the size, I don't know the size either of the oring. does anyone know where I can get one or the size. Thanks!
|
|
05-09-2018, 11:03 PM | #2 |
Join Date: Oct 2017
Location: Houston,Tx
Posts: 257
|
I just replaced my starter. Glad to send you my old o ring if you want. Just message me your address.
|
|
05-10-2018, 12:55 AM | #3 |
Join Date: Feb 2018
Posts: 11
|
well its not the oring that goes on the starter itself, its the oring on the cover that goes over the starter gears on the left side of the engine. This cover is held on with 3 bolts. my starter oring is good though.
|
|
05-10-2018, 07:54 AM | #4 |
Join Date: Mar 2008
Posts: 2,436
|
https://www.bike-parts-honda.com/pie...ed+Wheels.html #10 = 63*3.0 (ie. 144 /230 are close enough in theory)
__________________
Last edited by humanbeing; 05-10-2018 at 09:28 AM. |
|
05-10-2018, 09:19 AM | #5 |
Join Date: Feb 2018
Posts: 11
|
Thanks for the help, got it ordered!
|
|
|
|
|
|