|
05-31-2017, 07:33 PM | #1 |
Join Date: Mar 2017
Posts: 43
|
Adjustment to safety switch on brake pedal.
Both Rhinos running flawlessly except...sometimes I can't get one of the units to start unless I stand on the brake pedal. Is there an adjustment that makes that switch more/less sensitive? I thought the actuator for this was in the brake lever housing on the handlebars. When I engage the brake lever it won't start...when I apply a normal amount of pressure on the foot pedal it won't start....when I apply a load of presssure on the brake pedal it starts right up.
|
|
06-03-2017, 03:41 PM | #3 |
Join Date: May 2009
Location: SASKATOON
Posts: 1,161
|
brake light switch
once you have that adjusted so the brake light comes on when depressed... put some silicone on the threads so they do not come out of adjustment again... can not tighten them up as they are plastic...
__________________
DEALER FOR ZSTAR & GIO PRODUCTS, TAOTAO ABIBABA ATV ETC |
|
06-04-2017, 12:22 PM | #4 |
Join Date: Mar 2017
Posts: 43
|
Thanks guys!
Thanks for the responses. Stuck out of state till the 15th. When I get home I will apply your suggestions and give you feedback.
|
|
|
|
|
|