|
07-31-2011, 07:21 AM | #1 |
Join Date: Jul 2011
Posts: 5
|
166 FFM Engine
Hy i have china bike Chituma with 166 ffm engine. I bought it with low kilometars, and this engine spends a lot of oil. I guess thats piston rings od valve rubbers ( I`m not sure if that is real name in english ) are in bad shape.... I hope you could tell where I can buy those parts or if someone know dimensions of piston rings for this engine? I tried to find service manual to download but i haven`t found it....If you can help me somehow I would be grateful!!
|
|
07-31-2011, 08:12 PM | #2 |
Join Date: Mar 2008
Posts: 2,436
|
223 MD33 clone? I will bet that is powered by Zongshen or other smaller brand, similar story heard in chinese foum 8O BUT not Loncin / Jialing
IF want to burn $$$ Genuine Honda SL230 (a domestic market model) parts will fits. Genuine Loncin: http://item.taobao.com/item.htm?id=6021892573 | Generic for ZS & clones: http://item.taobao.com/item.htm?id=6763804175 Depends the situation, one of these will suit ur case: http://item.taobao.com/item.htm?id=10226973122 http://item.taobao.com/item.htm?id=9877705399 http://item.taobao.com/item.htm?id=10236432912 |
|
08-01-2011, 11:19 PM | #3 |
Join Date: Oct 2009
Posts: 826
|
SL230 never offered in the USA only CR230 Those have 6 speeds |
|
08-03-2011, 09:37 AM | #4 |
Join Date: Jul 2011
Posts: 5
|
So you are 100% sure that parts fit from honda to my engine?
I have opened this engine and found piston in very bad shape...I really need to change piston so I`m looking for new piston but nobody has any spare parts for chituma around here. If piston really fit from honda then I`ll buy piston from honda. |
|
08-29-2021, 10:29 PM | #5 |
Join Date: Dec 2019
Posts: 17
|
Your piston you been looking for.....
https://a.aliexpress.com/_mO1J9Jl. Will fit for sure
|
|
09-29-2021, 01:50 PM | #6 |
Join Date: Jul 2018
Location: nw of atlanta
Posts: 169
|
If your piston is bad, I would look closely at the cylinder wall. Replacing both piston and cylinder is a common venture. They are available in combination from a lot of sources. Likely the Brozz piston/rings/cylinder will be a bolt-on, see here:
https://shop.brozz250.com/eshopprod_...r_Assembly.htm Note the image(make it bigger) and you will see the cylinder head, which should confirm the part is correct.... I think. Mebbe yours is smaller bore?? You may look here: https://www.aliexpress.com/item/32769547579.html?spm=a2g0o.productlist.0.0.6f86170 cLwQQAU&algo_pvid=022f276f-6045-41c3-8f0b-93cd62395cc9&algo_exp_id=022f276f-6045-41c3-8f0b-93cd62395cc9-31&pdp_ext_f=%7B"sku_id"%3A"62282761417"%7D Air-cooled piston/rings/wristpin/cylinder/gasket for CG250
__________________
vertical and above ground - my daily goal |
|
|
|
|
|