|
![]() |
#1 |
Join Date: Feb 2018
Location: nashville
Posts: 574
|
2017 Venom x22-S
i finally gave in and ordered the 125cc yesterday 2/28/2018.
has anyone come up with a list of popular mods yet? venom told me these are cloned after ninja 250. example of popular mods on other bikes: carb, exhaust, chain, sprockets. i know to replace fuel lines from prior china bikes. i wish there were peeps on this like the 250 hawk. please send me in the right direction if i am in wrong place Last edited by imapdog; 03-09-2018 at 09:50 PM. |
![]() |
![]() |
#2 |
Join Date: May 2006
Location: Yuma, Arizona
Posts: 9,035
|
You will have to research the Venom X22 from several months ago (the X22 without any letter after 'X22'https://www.venommotorsportsusa.com/collections/super-pocket-bikes/products/x22-super-pocket-bike-125cc?variant=30465839181 ). I recall a couple people bought them and prepped them. No member has compared them to the Vader as far as prepping them, but the engines are nearly identical as Boom, the manufacturer of the Vader is also the mfg. of the Ninja full-size replica and is able to certify these under the same EPA certificate meaning all engine necessities/prep should be the same.
__________________
"They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard |
![]() |
![]() |
#3 |
Join Date: Feb 2018
Location: nashville
Posts: 574
|
anyone know of a fender eliminate process/parts
crate is in, and this factory fender has to go. anyone post a solution to eliminate this ugly fender?
|
![]() |
![]() |
#4 |
Join Date: Feb 2018
Location: nashville
Posts: 574
|
|
![]() |
![]() |
#6 |
|
|
![]() |
![]() |
#7 |
Join Date: Feb 2018
Location: nashville
Posts: 574
|
found 17t 17mm 428 front sprocket. need rear now
front sprocket confirmation: stock is 14t
https://www.ebay.com/itm/17Tooth-428...edirect=mobile Last edited by imapdog; 03-11-2018 at 10:46 PM. |
![]() |
![]() |
#8 |
Join Date: Feb 2018
Location: nashville
Posts: 574
|
stock carb/intake are smaller than 26mm. here is mikuni 26mm mod
carb spinner to clear starter and frame:
Attachment 12178 https://imgur.com/b4DXk5D https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 * mikuni 26mm vm22 kit: left is stock, right is mukuni vm22: Attachment 12179 https://imgur.com/ZuNKNAR https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 Last edited by imapdog; 02-14-2020 at 08:47 AM. |
![]() |
![]() |
#9 | |
Join Date: Dec 2017
Posts: 216
|
Quote:
|
|
![]() |
![]() |
#10 | |
Quote:
Hmm this got entered in a prior thread Last edited by ikeus685; 11-19-2019 at 03:10 PM. Reason: entered in wrong thread |
||
![]() |
![]() |
#11 | |
Join Date: Feb 2018
Location: nashville
Posts: 574
|
Quote:
be sure to get a carb with mikuni #15 pilot jet. most come with dreaded #38 keihin jet and you dont want that one as its too hard to tune. find a vm22 listing that shows a picture of a tune kit that comes with it like this #15 pilot jet(keihin jets will look different).https://www.ebay.com/itm/Carburetor-...72.m2749.l2649(this one is #15 pilot jet and is the one you want)it comes as #15 pilot and #95 main so you will know the #'s without removing bowl. as far as the spinner for mounting the carb: the oring one sucks as oring will blow out. this one is best (without oring) and comes with correct screws(be sure to get correct screwdriver for best torque without striping it).: https://www.ebay.com/itm/26mm-Carb-C...72.m2749.l2649 yes made huge difference! |
|
![]() |
![]() |
#12 | |
Join Date: May 2018
Posts: 43
|
Quote:
it's not like you can type in "Venom X22" and eBay will show you sprocket for it |
|
![]() |
![]() |
#13 | |
Join Date: Mar 2018
Posts: 249
|
Quote:
|
|
![]() |
![]() |
#14 |
Join Date: Oct 2013
Location: Leesville SC
Posts: 835
|
I want to replace the carb on my Apollo 125 Pit bike. What jets fit that carb you linked on Amazon? That is a 26mm carb, I'm wondering if I should go with a Mikuni VM22 for my 125cc pit bike.
__________________
My Stable- 2022 Lifan KPX250 , 2023 Royal Enfield Himalayan, 1992 Honda GL1500 Goldwing, SSR 70 Auto, Kymco Mongoose 90, Honda Four Trax 300 |
![]() |
![]() |
#15 | |
Join Date: Feb 2018
Location: nashville
Posts: 574
|
Quote:
Last edited by imapdog; 03-14-2018 at 06:18 PM. |
|
![]() |
|
![]() |
![]() |
|
|