|
10-16-2023, 10:22 AM | #1 |
Join Date: Feb 2021
Posts: 994
|
KPX Speed Sensor Seal ???
I just saw a video of DadBod Bikers discussing their KPX bikes, and the mention how when they assembled their bikes, they accidentally left the speed sensor seal off one bike, and accidentally doubled it on another. I don't recall seeing a seal with mine, I just put it together. Should I have gotten a seal ? I honestly don't think I noticed if there was already one in the hub of the wheel.
|
|
10-16-2023, 10:32 AM | #2 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,707
|
I don't know about any seal. There's a metal spacer on the left side and a plastic spacer on the right side where the sensor is located.
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
10-16-2023, 10:37 AM | #3 |
Join Date: Feb 2021
Posts: 994
|
That's how I put mine together. I did kinda watch a MotoCheeze video were he mentioned an extra "mystery" seal that came with his bike, and I think he figured it to be a fork seal. I now have about 90 miles on my bike.
|
|
10-16-2023, 11:42 AM | #4 |
Join Date: Feb 2021
Posts: 994
|
I had put the question to the Facebook KPX group, and the guy that had the issue that I'm talking about said that it should have been on the sensor already, but it had evidently must have been left off, or fallen off before hand. He said that the lower fork strut would be greasy if it's not in place. I will look at mine, but figure it's on it.
|
|
|
|
|
|