|
09-15-2014, 05:08 PM | #1 |
Join Date: Aug 2012
Posts: 18
|
125 timing chain
Wanted to confirm my timing while I was checking my valve clearances but can't see any casted in timing marks. Not sure who makes this engine but 124cc is casted into it as the displacement. chain looked good and the mark on the magneto lines up to a dot on the case but that dot is not casted in, it is just a spot with no paint !.
Engine side view: timing gear - you can see the dot in the gear, but there is nothing on the case to line it up too ! Magneto - you can see the "dot" in this photo: It's running very badly right now so I'm checking everything step by step. Next I am going to seal the manifold better as I think it might be leaking. We put a larger Carb and exhaust on it and working out the bugs now. |
|
09-15-2014, 08:00 PM | #2 |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
Try this.
__________________
You meet the nicest people on a Honda Clone. |
|
09-15-2014, 10:46 PM | #3 |
Join Date: Aug 2012
Posts: 18
|
Thanks for the video link.
I actually found that one earlier, being an original Honda engine, it has the timing marks right in the casting and that is what the Chinese motor is lacking. If you pick one up that is not running and there are no reference marks, I'm not sure how you could confirm the timing. On mine I'm only guessing it's OK as it ran fine with the original carb and exhaust. There must be another way to confirm if you have no marks. |
|
09-16-2014, 01:03 AM | #4 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
I can't think of a way to confirm timing with no marks. Odd that they're not cast in.
What size jets are you running in the new carb? What size was in the old one?
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
09-16-2014, 02:16 PM | #5 |
Join Date: Feb 2009
Location: Green Bay, WI
Posts: 82
|
Usually the general rule is 9 & 12 o'clock respectively.
|
|
09-17-2014, 01:59 AM | #6 |
Join Date: Jan 2012
Location: ChCh , NZ
Posts: 2,265
|
The motor looks like a Lifan...
search for the timing of a Lifan...
__________________
09 XT660R ... 06 TTR250 ... 80 Montesa H6 125 Enduro... 77 Montesa Cota 348 MRR "Malcom Rathnell Replica"... Current resto projects.. 81 Honda CT110... 80 Kawasaki KL250A1... 11 Husaburg TE125 enduro... "sold" along with another 31... Lifan 125 Pitbike.. "stolen" ... KIWI BIKER FORUM...... http://www.kiwibiker.co.nz/forums/content.php All the best offroad rides in NZ... http://www.remotemoto.com/ E-mail... xtpete1@gmail.com |
|
|
|
|
|