|
![]() |
#1 |
Join Date: Sep 2014
Posts: 35
|
Xmotos 250 from POLAND
Hi , im from Poland - my english very easy ..
MY Xmotos 250 air cooled 2008 ..Im pay this bike 250$ Inso looked after purchase ![]() ![]() ![]() conducted in the winter overhaul New cylinder and piston 250cc Carb. pz30mm Full open exhaust Renthal 22mm handlebar Open air box Porting head + new valves Lightened flywheel -+ 450g Photos: ![]() ![]() ![]() in the summer I painted the frame on the black mat ,plastics have been painted gloss black NEW Rollgas Motoforce RAcing New Carb pz 30. New air filter MOTOFORCE RACING , But I do not have pictures yet,I will try to add soon |
![]() |
![]() |
#2 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Nice bike! Do you have the overhead cam motor?
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
![]() |
![]() |
#3 |
Join Date: Sep 2014
Posts: 35
|
I dont understand ...
![]() Google translate does not help me ![]() |
![]() |
![]() |
#4 |
Join Date: Jun 2009
Location: Brisbane, Queensland, Australia
Posts: 648
|
yes, good work my friend! looks like a rocket. easy to find parts in poland?
__________________
1971 Garelli Gulp 50cc with open ports and 16 mm Bing Carbie + 1980 Honda XL 223 ZS ![]() |
![]() |
![]() |
#5 |
Join Date: Sep 2014
Posts: 35
|
Hi.. Thanks for post.
In Poland a lot of parts for this bike , but no Tuning parts :( |
![]() |
![]() |
#6 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Camshaft on top of the motor? Show us pictures of the motor.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
![]() |
![]() |
#7 |
Join Date: Sep 2014
Posts: 35
|
Camshaft in the bottom of the engine
|
![]() |
![]() |
#8 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Ah, like a CG125? A pushrod motor. Is that right?
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
![]() |
![]() |
#9 |
Join Date: Sep 2014
Posts: 35
|
Yes
![]() edit; You can buy somewhere tuning parts for this engine ? Lightened rotor kit (magneto) big bore kits Maybe? |
![]() |
![]() |
#10 |
Join Date: May 2006
Location: Yuma, Arizona
Posts: 9,035
|
Welcome!
I think this is as close to your bike that we have in the US http://www.motobuys.com/xmoto-xz250.html
__________________
"They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard |
![]() |
![]() |
#11 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
I do not think so. Your engine is the largest CG type, and I am not aware of lightened rotor kits.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
![]() |
![]() |
#12 |
Join Date: Sep 2014
Posts: 35
|
culcune
Yes its my bike with air cooled engine ( Small power) liquid cooled with 4valves too much power ![]() ![]() Weldangrind Cg engine tuning is a big problem because dont tuning parts :( Im make lightened magneto , but in the winter, try to set up a inner rotor kit with 125cc engine Do you understand me? My english ? You use a facebook ? ![]() |
![]() |
![]() |
#13 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Yes, I think I understand you.
![]() You will try to use an inner rotor kit for a 125 in your CG250? Good idea! No, I don't use Facebook.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
![]() |
![]() |
#14 |
Join Date: Sep 2014
Posts: 35
|
There will be some problems with installing, but I think I can. I'll have to weld aluminum
![]() |
![]() |
![]() |
#15 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Wow! Do you TIG weld?
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
![]() |
|
![]() |
![]() |
|
|