|
|
05-15-2017, 07:10 AM
|
#1 |
|
Join Date: Apr 2017
Location: Woods, Maine
Posts: 247
|
Vader - Valve clearance
Does anyone know the valve clearances for the vader 125cc, are they the same as the grom? I'm at about 100 miles so I plan to do a valve check/oil change today. Also do we have a list of bolts to hit with loctite? I know I should probably just replace the motor mount bolts and swing arm bolts, anything else to consider?
|
|
|
05-15-2017, 09:40 AM
|
#2 |
|
Join Date: Mar 2017
Location: Lansing, MI
Posts: 61
|
For valve clearance, taken from T Bolt USAs website..
"Adjust your tappets to .003" intake and .005" exhaust"
__________________
***Convert your engine to Electronic Fuel Injection*** Trail: 07 Coolster: Lifan 1P52FMI, PZ26 carb, red bars, CNC throttle, "Metal Mullisha" plastics (the GF's bike) 16 SSR SR125: PZ26, New Racing CDI, Blue plastics, LED headlight Street: 16 Boom Vader 125: Microsquirt EFI conversion, HID/LED headlights, 17T front sprocket, O-Ringed Gold chain, adjustable rear damper, The DD 
|
|
|
|
05-15-2017, 02:04 PM
|
#3 | |
|
Join Date: Apr 2017
Location: Woods, Maine
Posts: 247
|
Quote:
|
|
|
|
|
05-15-2017, 05:21 PM
|
#4 |
|
Join Date: Apr 2017
Location: Woods, Maine
Posts: 247
|
GRRR! I removed the lower valve cover with ease. The top cover has bolts that are way over torqued. There isn't enough room to get a 6-point ratchet in and I'm too afraid to continue with a standard wrench in fear of stripping. Vice grips have provided no relief either.
 Has anyone else encountered this problem?
|
|
|
|
05-17-2017, 01:41 PM
|
#5 | |
Join Date: Apr 2017
Location: Boston area
Posts: 171
|
Yeah, i was lucky to have a thin walled sockets set that I picked up at Home Depot a while ago.
Quote:
|
|
|
|
|
05-20-2017, 07:28 AM
|
#6 | |
|
Join Date: Apr 2017
Location: Woods, Maine
Posts: 247
|
Quote:
|
|
|
|
|
|
|
 |
|
|
Hybrid Mode
