Oops over- drilled

KseKermit · 05-26-2020, 07:22 PM

I don't recommend it, I'm lucky nothing broke off and went into my engine. I over drilled my 105 main that comes in the brozz, so I decided I wasn't waiting for my jet kit to get here to ride, so this is what I rigged up. Copper wire bent to restrict flow with another piece holding it on. Wasn't too bad actually.

Weldangrind · 05-27-2020, 09:12 PM

I've flowed a little solder into jets that were too big and drilled again. So far so good.

franque · 05-28-2020, 03:23 AM

Yeah, just solder and redrill... That probably won't run too well.

KseKermit · 05-28-2020, 07:12 PM

Quote:

Originally Posted by franque

Yeah, just solder and redrill... That probably won't run too well.

It ran super good actually! Hit 70mph, was a tad rich but still got the job done.

Megadan · 05-28-2020, 06:05 AM

Or, just buy a cheap main jet kit and skip having to drill? less than 9 dollars. https://www.amazon.com/10pcs-Carbure...omotive&sr=1-6

Are they as good as genuine jets? No, but they still work.

KseKermit · 05-28-2020, 07:10 PM

Quote:

Originally Posted by Megadan

Or, just buy a cheap main jet kit and skip having to drill? less than 9 dollars. https://www.amazon.com/10pcs-Carbure...omotive&sr=1-6

Are they as good as genuine jets? No, but they still work.

Yep I had one ordered, was waiting on it to deliver while I was "fixing" my oops.

05-27-2020, 09:12 PM	#2
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	I've flowed a little solder into jets that were too big and drilled again. So far so good. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	1

05-28-2020, 06:05 AM	#5
Megadan Join Date: Apr 2017 Location: Omaha, NE Posts: 8,138	Or, just buy a cheap main jet kit and skip having to drill? less than 9 dollars. https://www.amazon.com/10pcs-Carbure...omotive&sr=1-6 Are they as good as genuine jets? No, but they still work. __________________ Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124
	1

05-28-2020, 03:23 AM	#3
franque Join Date: Nov 2017 Location: Marseille, France -> Conakry, Guinea Posts: 1,481	Yeah, just solder and redrill... That probably won't run too well.
	1