Quote:
Originally Posted by Weldangrind
I'm betting that the brake rod link I shared is the right one, and then we need to find a new lever for the drum and a new foot lever; is that right?
The best way to deal with that exhaust is to throw it in the scrap bin. The exhaust link I shared will be a better fit, IMHO.
|
Ahh yes, I see now, that rod will work, then I need the lever for the drum. I've got the foot lever still on the bike. Just need the rod, and the little arm/lever that goes around the little nub that pokes out of the rear drum and when its turned it engages the brakes.
I am also having trouble with my chain not staying tight. I'll get it to the right tension, not loose, but not tight either so it has a little play for when I sit on it and the shock moves, or when I;m off road an the shock is flexing. I tighten down the chain/axle tensioners, and then tighten down my axle bolts. I can ride it for about 5 mins and come back and the chain will be super loose. I'm gonna make a video and take some pictures here in a bit and post a thread that way you can see what the rear end looks like. I noticed I have two spacers on the inside on the side where the sprocket is, and none on the other side. Not sure if you remember, but there was a spacer on the outside, and you suggested I move it to the inside. I did that, and it seemed to line it up way better. I just noticed theres none on the other side. Like I said Ill take some pics and a short video and put it up in a little while.