05-24-2015, 08:28 PM | #1 |
Join Date: Oct 2014
Posts: 187
|
China Speedo/ Odometer Problems entering into Setup
I got my new speedo from Hong Kong,
This is what it looks like. http://www.ebay.com/itm/Digital-Odom...8178a5&vxp=mtr I installed the wires, and glues the magnet on my wheel, and installed a bracket that the black Sensor is locked on with Nuts. I tried moving the sensor back 1 inch away and really close 5 ml away. I was still not getting any readings, or getting into the Setup. I have tried a few things to see if would work, someone told me I hold the right button down for couple of secs and it will eventually go into a setup mode. This does not work for me. I tried to disconnect my battery and then connecting it again to make it reboot and first boot-up. This does not work, When I did disconnect it and reconnected it, the Digital screen starts up and does its count up powering. Is this ok? I was able to change things on the display like the TIME, and I was able to switch to TRIP A, also this area that I can enter a number from 1200 to 2100 I believe. Im not to sure what this number is. Also an area where I can do either 1 or 5 in the first area, the 2nd area I can either 1 or 2, 1 = KM and 2 = MPH and I think an area for 2 or 4 , 2 = 2 stroke and 4= 4 stroke.. Im not 100% sure if I am right but if anyone can help me in any way. Thanks |
|
|
|
|
|