Working With Diagnostic Data Cable & Software

[katflap]

Originally Posted by muzo_31

Hi folks.
I've seen a video of a russian guy running openDiagFree on a MT05.
It was set in KWP2000 mode.
Unfortunately, I cannot use it as button texts are not translated into non russian language.

I have had a play with openDiagFree, see here

http://www.chinariders.net/showpost....7&postcount=35

Though It does connect it dosen't recognise the PIDs . It is still a useful as it can be used to clear current and historic fault codes. Though i can translate it I can't do anything about the PID bit so the info that it displays for the Delphi mt05 is of know use