Go Back   ChinaRiders Forums > Technical/Performance > Dual Sport/Enduro
Register FAQ Community Calendar Today's Posts Search
 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 04-20-2020, 01:30 AM   #1
Captcj68chris@aol.   Captcj68chris@aol. is offline
 
Join Date: Mar 2020
Location: Bowling greenK.Y. elev. <1000 ft
Posts: 94
Thumbs Up Tbr7 update

Hi all. Today was a beautiful spring day! Time for a ride, put 20km. On
My bike, installed the 17 tooth sprocket (still haven't got my jets yet).
Rode some side streets, got it up to speed, I can tell the difference just
From the 17tooth. The gears wind out more, first is good for more that
1.897654 mph! Helps in the trails better. Rode some power lines, and some
Pretty decent short hills in the woods. Stock tires SUCK in anything that
LOOKS like it MIGHT be sand! Or dirt for that matter, I gotta get nobbies!
Bike is not so nimble on tight single track woods. bike is tall and weighs
165lbs more that my 5,7inch me😟 I'm thinking 43 tooth rear,maybe
A little smaller 41? And I should be ok. One thing I'm noticing is
Engine braking. My first 4 stroke, always had 2 stroke, with this bike
As soon as you roll off the throttle, the bike wants to slow down. Seems
As you can't coast in gear. So your always either accelerating,maintaining
Speed or slowing down. And if you chop the throttle at higher rpm's
It's a very Noticeable. ( ever drive an electric car? Like a tesla sport car)
Anyway I had fun.


 
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:08 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.