Instrument panel and engine start problem

MIchaelGR · 10-07-2020, 01:44 PM

Today i started my rx3 bike.
After some metres driving i realise that the instrument panel back light was "blinking" (on and off fast).
I stopped and switch off the light and then.. my bike switched off!
no panel display at all!
I took off the ignition key, put it back again, switch it on and still nothing on the panel...
I pressed the clutch an the panel indicators appear (while pressing the clutch) , but when i left the clutch nothing again!
Also , only when the clutch remains pressing the rpm clock is working only. That way i managed to start the engine (after several times) but on the panel was only speedo, fuel and the gear number was flashing.
I am really confused on what to do guys..
Is it a battery problem?
Any advice would be appreciated!

(My rx3 is 2015 model with 12000 km
and i am sorry for my bad English!)

10-07-2020, 01:44 PM	#1
MIchaelGR Join Date: Jan 2020 Posts: 2	Instrument panel and engine start problem Today i started my rx3 bike. After some metres driving i realise that the instrument panel back light was "blinking" (on and off fast). I stopped and switch off the light and then.. my bike switched off! no panel display at all! I took off the ignition key, put it back again, switch it on and still nothing on the panel... I pressed the clutch an the panel indicators appear (while pressing the clutch) , but when i left the clutch nothing again! Also , only when the clutch remains pressing the rpm clock is working only. That way i managed to start the engine (after several times) but on the panel was only speedo, fuel and the gear number was flashing. I am really confused on what to do guys.. Is it a battery problem? Any advice would be appreciated! (My rx3 is 2015 model with 12000 km and i am sorry for my bad English!)
	0