getting an xpro titan and apollo db36 soon, shipped yesterday

OBrienx · 07-25-2021, 01:31 AM

ok 0-25% throttle i got you.

there is a cap atthe top of the carb that the throttle cable goes to

under that cap is a slider and a needle under that... you might need to watch a video how to take the cable off and not want to rip it apart as it takes practice to get these things off and on fast.

once the needle is out of the slider change the clip position from 3(middle) to up one or down one

if you move it up one it will lean out your bike at 0-25% throttle
if you move it down one it will rich the bike at 0-25% throttle

its a good thing to note you really should have access to a mixture screw when you do tuning.. overall if you want to fix the condition you should swap the carb

07-25-2021, 01:31 AM	#11
OBrienx Join Date: Jul 2021 Location: London, Ontario, Canada Posts: 30	ok 0-25% throttle i got you. there is a cap atthe top of the carb that the throttle cable goes to under that cap is a slider and a needle under that... you might need to watch a video how to take the cable off and not want to rip it apart as it takes practice to get these things off and on fast. once the needle is out of the slider change the clip position from 3(middle) to up one or down one if you move it up one it will lean out your bike at 0-25% throttle if you move it down one it will rich the bike at 0-25% throttle its a good thing to note you really should have access to a mixture screw when you do tuning.. overall if you want to fix the condition you should swap the carb __________________ 2013 Apollo 250RX -Zong db36 233cc engine w/ titanium valves, ported exh. -WizeCo 11:1 piston -CRF230 Athena big bore cylinder -Powercore 788 Exhaust -HF K&N Pod Filter and intake -1/4 fuel lines and valves w/ plastic tank -HR handle bars and MX pully controls -CRF230 SHOWA fork -Oversized MX brakes & rotors -17T 46T (3.07 Gear ratio) JT Sprockets with a D.I.D gold MX chain -Keihin pwk30 30mm carburetor 115main/35pilot
	0