Help with rear hub TaoTao 125D

miatawnt2b · 10-10-2021, 11:08 PM

Hey guys,
I have three TaoTao 125D's with the 3 bolt, 7" rims. One has a bent rear hub, so I figure no problem, ordered one on VMC. The only 3 bolt 23 spline hub they have is ver48, part# 214-RH518-48

So I ordered one. The splines fit the axle, but the hub is about 1/2" too short so even when the axle bolt is screwed on, the hub can slide back/forth. Additionally the new hub has a 78mm hole to hole pattern and the original one has a 70mm bolt spacing.
Even though VMC says this part fits a 125D, It is not the same as what is on all 3 of my quads.

I have tried to find the right hub, but everything I find is the same as the VMC part. Any thoughts?
-J

10-10-2021, 11:08 PM	#1
miatawnt2b Join Date: Dec 2020 Posts: 78	Help with rear hub TaoTao 125D Hey guys, I have three TaoTao 125D's with the 3 bolt, 7" rims. One has a bent rear hub, so I figure no problem, ordered one on VMC. The only 3 bolt 23 spline hub they have is ver48, part# 214-RH518-48 So I ordered one. The splines fit the axle, but the hub is about 1/2" too short so even when the axle bolt is screwed on, the hub can slide back/forth. Additionally the new hub has a 78mm hole to hole pattern and the original one has a 70mm bolt spacing. Even though VMC says this part fits a 125D, It is not the same as what is on all 3 of my quads. I have tried to find the right hub, but everything I find is the same as the VMC part. Any thoughts? -J
	0