BD125-8 where is the "Oil Filter"?

Doubledown · 08-17-2022, 07:31 PM

I am doing the post break in oil change and looking at my manual and it says "2. Lay a oil-relief plate under the crankcase, dismantle the filter cover, then, the spring and the filter will pull out automatically 3. Clean filter 4. Check the oil filter, seal rubber, o-ring 5. install filter"

Now this manual is for several models but from what I can tell they have the same motor and I am not seeing a filter location anyway out in the open.

Does this motor have any sort of filter anywhere or is this just garbage and its a drain and replace?

While I am here and before tearing into things, what is the second drain bolt one the left side of the motor?

Thank you?

08-17-2022, 07:31 PM	#1
Doubledown Join Date: Jun 2022 Posts: 26	BD125-8 where is the "Oil Filter"? I am doing the post break in oil change and looking at my manual and it says "2. Lay a oil-relief plate under the crankcase, dismantle the filter cover, then, the spring and the filter will pull out automatically 3. Clean filter 4. Check the oil filter, seal rubber, o-ring 5. install filter" Now this manual is for several models but from what I can tell they have the same motor and I am not seeing a filter location anyway out in the open. Does this motor have any sort of filter anywhere or is this just garbage and its a drain and replace? While I am here and before tearing into things, what is the second drain bolt one the left side of the motor? Thank you?
	0