DB-06 Engine Swap

TheGammaGhost · 08-19-2012, 09:09 PM

Okay, Everything is about together, But the Counter shaft sprocket from my roketa engine didnt fit, so i am trying to get the Rear sprocket from the spare bike, on my DB-06, Ran into a problem though...

On my DB-06 wheels rear sprocket, One bolt is stripped to hell, and i cant get it off, there is a little rim around the 4 nuts, so i cant really use needle nose vice grips to get it off, i've soaked it in wd-40, the bolt is almost round, its so stripped, I may try to dremel it off, if i damage the bolt its self, can i replace it.

other than that it seems good so far, haven't started or rode it yet, but once i get the lifan sprocket on my wheel, I'll be good, Any tips to do this would be greatly appreciated!!!!

08-19-2012, 09:09 PM	#1
TheGammaGhost Join Date: Jan 2012 Location: Wisconsin, USA Posts: 386	Okay, Everything is about together, But the Counter shaft sprocket from my roketa engine didnt fit, so i am trying to get the Rear sprocket from the spare bike, on my DB-06, Ran into a problem though... On my DB-06 wheels rear sprocket, One bolt is stripped to hell, and i cant get it off, there is a little rim around the 4 nuts, so i cant really use needle nose vice grips to get it off, i've soaked it in wd-40, the bolt is almost round, its so stripped, I may try to dremel it off, if i damage the bolt its self, can i replace it. other than that it seems good so far, haven't started or rode it yet, but once i get the lifan sprocket on my wheel, I'll be good, Any tips to do this would be greatly appreciated!!!! __________________ 2021 Boom Vader Gen 2 BD125-10 Current 2011 DRZ400S Current 2006 LIFANIZED ROKETA DB-06 200cc Sold 2008 Ninja 250R Sold 1984 Honda aero 125 Sold 1980 Honda CM400T Sold
	0

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode