fork oil change

SpudRider · 06-12-2017, 12:57 AM

Setting the fork oil seal is easiest with a fork seal driver of the appropriate size. However, if you don't have a fork seal driver, you can use the method shown in the following video.

RC · 06-12-2017, 03:11 AM

Old Fork seal! So simple!

I knew I was on the right track with the PVC, but it was just missing the mark. I was going to reuse the old seals because they are still in perfect condition at 11k miles, and keep the new ones as spares. Maybe I'll stop by the local shop and see if I can find some cheap generic seals to cut and use. If not I'll buy a new set of backups because they are cheap.

Thanks for the tips!!

06-12-2017, 12:57 AM	#1
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	Setting the fork oil seal is easiest with a fork seal driver of the appropriate size. However, if you don't have a fork seal driver, you can use the method shown in the following video. __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

06-12-2017, 03:11 AM	#2
RC Join Date: Apr 2017 Location: EurAsia Posts: 46	Old Fork seal! So simple! I knew I was on the right track with the PVC, but it was just missing the mark. I was going to reuse the old seals because they are still in perfect condition at 11k miles, and keep the new ones as spares. Maybe I'll stop by the local shop and see if I can find some cheap generic seals to cut and use. If not I'll buy a new set of backups because they are cheap. Thanks for the tips!!
	0