Help, Valve caps for hi-bird 250 IIA

08obpwrx · 08-01-2008, 12:59 PM

i have the street bike, 250. I need to find a new valve cap, bc it cracked on me. its the same one as the 250 dual sport single cylinder models
[img=http://img137.imageshack.us/img137/2262/capsvc1.th.jpg]

katoranger · 08-01-2008, 04:15 PM

Should be and also a honda one will most likely fit too.

Allen

08obpwrx · 08-02-2008, 09:46 AM

thanks

heres a dumb question... which honda model? the nighthawk? Tanks again

katoranger · 08-02-2008, 06:13 PM

Try the dirt models. Not really sure, but one for an older xr200 etc.

Allen

IronFist · 08-03-2008, 01:09 AM

I have a valve cap from a cb350. Easy for me to measure. If it fits its yours. (Not perfect condition, and needs rubber O ring. 33cents at parts source)

PM me with the measurements of your cap

08obpwrx · 08-03-2008, 09:26 AM

^^ thanks

I will try to measure mine later today after work...

Qingdao · 08-04-2008, 01:00 AM

I'd be more concerned with the NASTY plug wire you are running.

08obpwrx · 08-04-2008, 05:51 PM

Quote:

Originally Posted by Qingdao

I'd be more concerned with the NASTY plug wire you are running.

]Yea... thats the pic from the valve adjustment sticky

I just used the pic for reference

IronFist · 08-04-2008, 10:10 PM

Mine is a cb350 cap 30mm.

Anyone have an XL or other cap to measure. 33mm cap needed.

08-01-2008, 12:59 PM	#1
08obpwrx Join Date: May 2008 Posts: 22	Help, Valve caps for hi-bird 250 IIA i have the street bike, 250. I need to find a new valve cap, bc it cracked on me. its the same one as the 250 dual sport single cylinder models [img=http://img137.imageshack.us/img137/2262/capsvc1.th.jpg]
	0

08-01-2008, 04:15 PM	#2
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	Should be and also a honda one will most likely fit too. Allen __________________ You meet the nicest people on a Honda Clone.
	0

08-02-2008, 06:13 PM	#4
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	Try the dirt models. Not really sure, but one for an older xr200 etc. Allen __________________ You meet the nicest people on a Honda Clone.
	0

08-04-2008, 01:00 AM	#7
Qingdao Join Date: Jun 2008 Location: Charleston, SC Posts: 351	I'd be more concerned with the NASTY plug wire you are running. __________________ <div><a href="http://www.youtube.com/watch?v=X2ilH...s</a></div><br />
	0

08-04-2008, 10:10 PM	#9
IronFist Join Date: Apr 2007 Location: Toronto Ontario Canada Posts: 2,585	Mine is a cb350 cap 30mm. Anyone have an XL or other cap to measure. 33mm cap needed. __________________ IronFist ___________________________________ The "chain" of command is used for beating spammers. ___________________________________
	0

08-02-2008, 09:46 AM	#3
08obpwrx Join Date: May 2008 Posts: 22	thanks heres a dumb question... which honda model? the nighthawk? Tanks again
	0

08-03-2008, 01:09 AM	#5
IronFist Join Date: Apr 2007 Location: Toronto Ontario Canada Posts: 2,585	I have a valve cap from a cb350. Easy for me to measure. If it fits its yours. (Not perfect condition, and needs rubber O ring. 33cents at parts source) PM me with the measurements of your cap
	0

08-03-2008, 09:26 AM	#6
08obpwrx Join Date: May 2008 Posts: 22	^^ thanks I will try to measure mine later today after work...
	0

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode