![]() |
#1 |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
Go kart parts
Guys. Looking for a 1" 36" long axle. Hubs, sprockets, belt torque convertor. I am building from scratch so length of axle is approximate.
I think I will buy a new harbor frieght predator, but if a cheap engine arrives would be interested in that too. Would also like some of the plastic bucket seats seen on alot of the Chinese buggies.
__________________
You meet the nicest people on a Honda Clone. |
![]() |
![]() |
#2 |
Join Date: May 2013
Location: finger lakes NY
Posts: 2,054
|
If you can get creative with lock collars and tractor hubs you can go to your local garage door company and ask for a piece of one inch keyed shaft, cut it down to length and use stop collars instead of go cart specific stuff... Thats what i did (i happen to work in a garage door company...LOL easy acess to parts...)
|
![]() |
![]() |
#3 |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
Is that found on the commercial doors? My neighbor in GA installed garage doors, but only residential stuff. Nothing that had a 1" shaft. (I scrapped the old stuff.)
__________________
You meet the nicest people on a Honda Clone. |
![]() |
![]() |
#4 |
Join Date: May 2013
Location: finger lakes NY
Posts: 2,054
|
Yep... The residential torsion setups use a 1" hollow tube, the heavy commercial stuff uses a 1" keyed shaft...
|
![]() |
![]() |
#5 |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
To find a garage door place. I will have to look in the yellow pages. Not many out here.
__________________
You meet the nicest people on a Honda Clone. |
![]() |
![]() |
#6 |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
I went down to the maintenance shop. Those doors have the 1 inch keyed shaft.
![]() Would I be able to talk you into shipping me about 40 inches? Maintenance guy said not much for local door places. 40 plus mile drive.
__________________
You meet the nicest people on a Honda Clone. |
![]() |
![]() |
#7 |
Join Date: Mar 2009
Location: Southeastern Washington desert
Posts: 14,761
|
You guys are very smart frugal and creative. True Chinariders!
__________________
Happy to serve. |
![]() |
![]() |
#8 |
Join Date: May 2013
Location: finger lakes NY
Posts: 2,054
|
Hmm... Not sure exactly how to ship a shaft like that, and the shortest length i can buy it is about 6ft... I will look into it, but shipping that stuff isnt gonna be cheap... Its pretty heavy stuff...
|
![]() |
![]() |
#9 |
Join Date: Dec 2013
Location: mountainhome, id
Posts: 23
|
winner winner chicken dinner
here is a keyed shaft 1in by 48 figured u can cut 4in off
http://www.mscdirect.com/product/85510261 also if u use harbor freight make sure you use a cupon 20% off send me message i send u cupon via email ![]()
__________________
i am a tinkerer give me a puzzle ill find a solution. or cut the pieces to fit. |
![]() |
![]() |
#10 | |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
Quote:
Thanks for the idea though. Kelvinator. I will get ahold of you about the coupon. Allen
__________________
You meet the nicest people on a Honda Clone. |
|
![]() |
![]() |
#11 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Do you need to use a torque converter? They're spendy, and centrifugal clutches are often rebuildable.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
![]() |
![]() |
#12 |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
I don't have too use a torque convertor. That is one of those parts that may be optional. They have knockoffs that run about $100. Good clutches can run almost that much.
__________________
You meet the nicest people on a Honda Clone. |
![]() |
![]() |
#13 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
If you find a $100 knock-off, please send me a link. BTW, perhaps Bogieboy has some parts for sale.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
![]() |
![]() |
#14 |
Join Date: May 2013
Location: finger lakes NY
Posts: 2,054
|
I wish i did...LOL All my spare parts went into building my go cart...only stuff i still have are a set of spare hubs that my buddy has been bugging me about, but havent had time to show him to see if they.would work for his build...
|
![]() |
![]() |
#15 |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
If the hubs don't work let me know.
Weld, here is the link. They have auction style listings too. I have seen them go in the $95 range. http://www.ebay.com/itm/3-4-GO-KART-...item35cf287784
__________________
You meet the nicest people on a Honda Clone. |
![]() |
|
![]() |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|