08-04-2014, 12:31 PM | #1 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Keihin Clone Jets
I was recycling some old PZ27 carb bodies that are not useful anymore, and I removed these two jets. One is a 109 and the other is a 94, and I'm pretty sure they're otherwise identical. The emulsion tubes are slightly different heights, but probably interchangeable. It doesn't really matter, since the jet unscrews from the tube.
Can anybody use them? I could even drill them out with my numbered set, if you're looking for something bigger. They're yours for the mailing cost. Sorry for the blurry pic. IMG-20140804-00245.jpg
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
08-04-2014, 08:01 PM | #2 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
I can't use the jets, but I do want to thank you for your generosity, and your consistent desire to help others.
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
08-05-2014, 02:00 AM | #3 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Willful waste makes woeful want. Somebody can use 'em.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
08-07-2014, 02:23 AM | #4 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Any takers?
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
08-07-2014, 09:56 AM | #5 |
Join Date: May 2013
Location: finger lakes NY
Posts: 2,054
|
what would the stock jets be in a 200? i have a feeling i need to jet mine up, but its 4 states away right now... also how would one go about finding out what size they are?
|
|
08-07-2014, 10:22 AM | #6 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
The stock jet size varies. These two are 104 and 109, and the number is stamped on the head.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
|
|
Thread Tools | |
Display Modes | |
|
|