Hi-Bird CDI

DirtRoadKing · 04-27-2008, 10:03 PM

The Hi-Bird CDI appears to have a different plug configureation than most of the other GY bikes. The others appear to have typical Honda plugs. The only Honda that I can find that has the same plug type as the Hi-Bird's is the Honda Elite 150 scooter and not much in the way of "performance CDI's". Anyone know more about this Type CDI plug type that might work for performance on these Hi-Birds? Thanks

Cal25 · 04-27-2008, 10:20 PM

Hey dirt road, Check the website that was provided earlier. They had a pigtail that could be used to adapt their unit for pit bikes and such with different conecters.

You would need to figure out what each terminal is for but I think that would be a solultion to your quest.

DirtRoadKing · 04-27-2008, 10:33 PM

Thanks, I saw that but I was kinda looking for a plug and go set up. I have a wiring diagram but I'd rather shop and research a little so it will be an easy change back if I have undesirable results.
Edited; I looked at those pit bike pigtails again, they don't look like they will do the job either.

daveJ · 04-28-2008, 12:49 PM

Hmm have you found one? lol thats mine in my pic, i want to get one to! my 39 rear should be hear today

DirtRoadKing · 04-28-2008, 02:55 PM

No, I hanen't found anything that will match the plugs that is a high performance CDI. Where did you order your 39 from? I have a 44 on one and a 46 on the other right now.

daveJ · 05-01-2008, 12:37 PM

I got it at a local place it was $25 its a steel jt one, i put it on last night and took it for a rip, seems like its going to be great!

daveJ · 05-01-2008, 12:47 PM

http://www.chinariders.net/modules.p...&p=12868#12868

just look at local places that sell bike sprockets for 1974-1978 Honda XL125; 1978-1979 CM185/T; 1979-1983 Honda XL185/S; 1980-1982 CM200T Twinstar etc.

srreynolds2003 · 05-01-2008, 12:49 PM

HI-BIRD CDI It looks like this one...So you might try find a high perfomance CDI for an XL125

http://cgi.ebay.com/ebaymotors/NEW-H...QQcmdZViewItem

daveJ · 05-01-2008, 12:55 PM

Wow thanks! ill look into it, honda XL125

daveJ · 05-01-2008, 12:58 PM

Maybe ill just rewire it....

srreynolds2003 · 05-01-2008, 01:50 PM

Also It looks like this one for the CB250 might fit also...I am just going by pictures...so you might want to try and research a little more before buying..

http://cgi.ebay.com/ebaymotors/NEW-C...QQcmdZViewItem

DirtRoadKing · 05-01-2008, 01:55 PM

That's the same plugs. Now we have a little more to go on. Thanks

04-27-2008, 10:33 PM	#3
DirtRoadKing Join Date: Mar 2008 Location: Florida Posts: 146	Thanks, I saw that but I was kinda looking for a plug and go set up. I have a wiring diagram but I'd rather shop and research a little so it will be an easy change back if I have undesirable results. Edited; I looked at those pit bike pigtails again, they don't look like they will do the job either. __________________ 2001 HD Roadking 2008 Hi-Bird/Ricardo http://www.chinariders.net/gallery2/...g2_itemId=8088
	0

04-28-2008, 02:55 PM	#5
DirtRoadKing Join Date: Mar 2008 Location: Florida Posts: 146	No, I hanen't found anything that will match the plugs that is a high performance CDI. Where did you order your 39 from? I have a 44 on one and a 46 on the other right now. __________________ 2001 HD Roadking 2008 Hi-Bird/Ricardo http://www.chinariders.net/gallery2/...g2_itemId=8088
	0

05-01-2008, 12:49 PM	#8
srreynolds2003 Join Date: Aug 2007 Location: Tomball, TX Posts: 382	HI-BIRD CDI It looks like this one...So you might try find a high perfomance CDI for an XL125 http://cgi.ebay.com/ebaymotors/NEW-H...QQcmdZViewItem __________________ -2005 Sierra SR200-
	0

05-01-2008, 01:50 PM	#11
srreynolds2003 Join Date: Aug 2007 Location: Tomball, TX Posts: 382	Also It looks like this one for the CB250 might fit also...I am just going by pictures...so you might want to try and research a little more before buying.. http://cgi.ebay.com/ebaymotors/NEW-C...QQcmdZViewItem __________________ -2005 Sierra SR200-
	0

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-27-2008, 10:03 PM	#1
DirtRoadKing Join Date: Mar 2008 Location: Florida Posts: 146	Hi-Bird CDI The Hi-Bird CDI appears to have a different plug configureation than most of the other GY bikes. The others appear to have typical Honda plugs. The only Honda that I can find that has the same plug type as the Hi-Bird's is the Honda Elite 150 scooter and not much in the way of "performance CDI's". Anyone know more about this Type CDI plug type that might work for performance on these Hi-Birds? Thanks __________________ 2001 HD Roadking 2008 Hi-Bird/Ricardo http://www.chinariders.net/gallery2/...g2_itemId=8088
	0

04-27-2008, 10:20 PM	#2
Cal25 Join Date: Feb 2008 Location: Terrell and Grapevine Tx. Posts: 1,585	Hey dirt road, Check the website that was provided earlier. They had a pigtail that could be used to adapt their unit for pit bikes and such with different conecters. You would need to figure out what each terminal is for but I think that would be a solultion to your quest.
	0

04-28-2008, 12:49 PM	#4
daveJ Join Date: Jan 2008 Location: Sk, Canada Posts: 68	Hmm have you found one? lol thats mine in my pic, i want to get one to! my 39 rear should be hear today
	0

05-01-2008, 12:37 PM	#6
daveJ Join Date: Jan 2008 Location: Sk, Canada Posts: 68	I got it at a local place it was $25 its a steel jt one, i put it on last night and took it for a rip, seems like its going to be great!
	0

05-01-2008, 12:47 PM	#7
daveJ Join Date: Jan 2008 Location: Sk, Canada Posts: 68	http://www.chinariders.net/modules.p...&p=12868#12868 just look at local places that sell bike sprockets for 1974-1978 Honda XL125; 1978-1979 CM185/T; 1979-1983 Honda XL185/S; 1980-1982 CM200T Twinstar etc.
	0

05-01-2008, 12:55 PM	#9
daveJ Join Date: Jan 2008 Location: Sk, Canada Posts: 68	Wow thanks! ill look into it, honda XL125
	0

05-01-2008, 12:58 PM	#10
daveJ Join Date: Jan 2008 Location: Sk, Canada Posts: 68	Maybe ill just rewire it....
	0

05-01-2008, 01:55 PM	#12
DirtRoadKing Join Date: Mar 2008 Location: Florida Posts: 146	That's the same plugs. Now we have a little more to go on. Thanks __________________ 2001 HD Roadking 2008 Hi-Bird/Ricardo http://www.chinariders.net/gallery2/...g2_itemId=8088
	0