Go Back   ChinaRiders Forums > Technical/Performance > Pure Dirt
Register FAQ Community Calendar Today's Posts Search
Reply
 
Thread Tools Search this Thread Display Modes
Old 07-28-2013, 11:02 AM   #1
tokarev   tokarev is offline
 
Join Date: Sep 2007
Location: Safety Harbor Florida USA
Posts: 214
New Air filter = carb rejet

Finally got around to installing the filter I bought a few years back - Now I need to know the recommended carb jet sizes. I live at sea level in semi tropical central Florida if that makes any difference. At the same time I am going to try ditching the battery - leave the wiring minus the battery. Any ideas are welcome.
__________________
Home of the SHTF 50 , SHF R50 and KEG12 shotguns


 
Reply With Quote
Old 07-28-2013, 12:59 PM   #2
Weldangrind   Weldangrind is offline
 
Weldangrind's Avatar
 
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
Please remind us of the engine size.

Also, no battery can work. That's how Son of Weldangrind's 83 XR200R is set up right now. It starts every time he kicks it, so we haven't installed a battery yet, but it's on the list.
__________________
Weldangrind

"I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer


 
Reply With Quote
Old 07-28-2013, 01:07 PM   #3
tokarev   tokarev is offline
 
Join Date: Sep 2007
Location: Safety Harbor Florida USA
Posts: 214
engine size

250 model so 230
__________________
Home of the SHTF 50 , SHF R50 and KEG12 shotguns


 
Reply With Quote
Old 07-28-2013, 01:17 PM   #4
Weldangrind   Weldangrind is offline
 
Weldangrind's Avatar
 
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
Are you running a Mikuni or a Keihin clone?
__________________
Weldangrind

"I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer


 
Reply With Quote
Old 07-28-2013, 02:42 PM   #5
tokarev   tokarev is offline
 
Join Date: Sep 2007
Location: Safety Harbor Florida USA
Posts: 214
carb type

Mikuni I believe
__________________
Home of the SHTF 50 , SHF R50 and KEG12 shotguns


 
Reply With Quote
Old 07-28-2013, 04:38 PM   #6
matasar   matasar is offline
 
matasar's Avatar
 
Join Date: Jul 2013
Posts: 27
im running same stuff and bored mine 1.1mm, most pull at 5000 i think with current but revs to 8000 or less..any thing above 1.1 is bad.
pin set to middle else it will go rich.
Living by the sea in north sweden and its 25c or so out.
Would like to try 1.05


 
Reply With Quote
Old 07-29-2013, 01:36 AM   #7
Weldangrind   Weldangrind is offline
 
Weldangrind's Avatar
 
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
With 230cc at sea level (and a Mikuni, identified by four float bowl screws), foam pod filter and free-flowing muffler, I'd use a 115 main and a 27 to 30 slow jet.
__________________
Weldangrind

"I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer


 
Reply With Quote
Old 08-01-2013, 11:04 AM   #8
tokarev   tokarev is offline
 
Join Date: Sep 2007
Location: Safety Harbor Florida USA
Posts: 214
jets

Thanks for the info on the carb jets - 2 questions, should those jets be available at a local bike shop? and the bulge in the exhaust pipe is a cat converter? Have tig welder will fix if so.
__________________
Home of the SHTF 50 , SHF R50 and KEG12 shotguns


 
Reply With Quote
Old 08-01-2013, 07:15 PM   #9
Weldangrind   Weldangrind is offline
 
Weldangrind's Avatar
 
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
Mikuni jets can be found at the local Yamaha dealer, but Honda will be hit or miss if it has a Keihin clone.

If the bulge is in the header pipe, it is most likely a cat. Do you have an air injector as well? It will most likely be a tube and flange on the right side of the head.
__________________
Weldangrind

"I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer


 
Reply With Quote
Old 08-02-2013, 10:41 AM   #10
tokarev   tokarev is offline
 
Join Date: Sep 2007
Location: Safety Harbor Florida USA
Posts: 214
Yes on the air injector - I removed that right away.
__________________
Home of the SHTF 50 , SHF R50 and KEG12 shotguns


 
Reply With Quote
Old 08-02-2013, 10:01 PM   #11
Weldangrind   Weldangrind is offline
 
Weldangrind's Avatar
 
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
You'll definitely need fatter jets once the cat is removed. You'll notice the increase in power.
__________________
Weldangrind

"I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer


 
Reply With Quote
Reply

Tags
battery, carb, jets, rejet



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:09 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.