![]() |
#1 |
Join Date: May 2020
Posts: 13
|
Oops over- drilled
I don't recommend it, I'm lucky nothing broke off and went into my engine. I over drilled my 105 main that comes in the brozz, so I decided I wasn't waiting for my jet kit to get here to ride, so this is what I rigged up. Copper wire bent to restrict flow with another piece holding it on. Wasn't too bad actually.
|
![]() |
![]() |
#2 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
I've flowed a little solder into jets that were too big and drilled again. So far so good.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
![]() |
![]() |
#4 |
Join Date: Apr 2017
Location: Omaha, NE
Posts: 8,100
|
Or, just buy a cheap main jet kit and skip having to drill? less than 9 dollars. https://www.amazon.com/10pcs-Carbure...omotive&sr=1-6
Are they as good as genuine jets? No, but they still work.
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 |
![]() |
![]() |
#5 | |
Join Date: May 2020
Posts: 13
|
Quote:
|
|
![]() |
|
![]() |
![]() |
|
|