09-05-2023, 04:35 PM | #3 |
Join Date: Aug 2023
Posts: 2
|
I have a 250 RPS magician 167 fmm stamped on the block. Carbureted, I purchased it knowing it needed work stator was missing that's what I'm on right now I purchased one but the colors of the wires are different than the factory harness.
Stator to harness Blue/white Yellow Pink Red/blk Green/white Harness to stator 2 solid yellows Blue/white Solid green. Obviously the blue and white go together I would assume but I'm getting no spark. I got two double check all my saf ety sensors. But it does have a strong rollover. The picture of your connector you have on here if I had the wire color position of those I believe I would be golden. Any help I do appreciate you guys thank you |
|
|
|
Tags |
burn, hawk 250, magician 250, stator, wiring harness |
|
|