Moto Cult

[bigdano711]

Originally Posted by Bill Hilly

I have went the cheaper way, and did not buy from Motocult, but I have the long duration cam, timing advance key, and a home ported head, along with a 250cc jug, and piston (70mm). I also have the roller followers, and my definitely has more power at higher RPM than it did. I don't think 10,000 rpm would be possible, and if it were, it's power would have probably dropped off, but my bike will pull, and still be making good powered past 8,000. I don't like to run it past 8,000, but I have let it get a little past it a few times, in the lower gears , mainly by accident. Some say that it's not really stressing these motors to run such high RPM , but I don't like to. Warming up the CG motor has kinda fallen out of favor, because a lot are just switching to the OHC, 6 speed, but if I compare my Hawk to my KPX, there is no real difference in range if the bikes, and I am sure the Hawk will out accelerate the KPX, and both bikes run , and run unstressed , on the fast main roads. The only use my Hawk could possibly have for a 6th gear, would be in the case of wanting it to be able to crawl through harsh rocky terrain, and therefore using lower sprocket ratios.

If not MotoCult, who? links?

[Bill Hilly]

Originally Posted by bigdano711

If not MotoCult, who? links?

This is the cam and followers, I ordered, but they ended up being free to me, because they didn't show up till way later, and I already was refunded my money. The cam gear didn't have a dot on it, but I just used the slot for the cam pin as reference, and made my own dot, it was only one tooth away from the slot for the pin. I got the 4degree key from a member on here. I am pretty sure the cam is a 292 grind.https://www.ebay.com/itm/174384704948
This is the 70mm (250cc) kit, I used, but it comes with a stock like head gasket though, and I wish I had the steel one.Just found this amazing item on AliExpress. Check it out!
$75.84 | 70mm Big Bore Cylinder Kit Cylinder Piston Set For CG250 TO 300 CG300 16mm pin 167FMM
https://a.aliexpress.com/_mMSYA6m