![]() |
#1 |
Join Date: May 2024
Posts: 2
|
2023 Vader 150 Front Sprocket Help!
Hello! First post and first chinese ride! I recently tried to upgrade my stock 428-15tooth front sprocket with a 428-17tooth front sprocket but the center shaft size on the new 17t sprocket was too small to fit on the shaft. Anyone know what size center I would need on a 17t? I guess i just ordered one i saw someone put on their 125cc. Are they not the same size?
|
![]() |
![]() |
#2 |
Join Date: Aug 2013
Posts: 130
|
Make sure you get the 20mm shaft.
https://www.amazon.com/dp/B098X7HNC3 13-17T fits without any modification, just plug and play. For an 18T, you'll need to grind a little off of the top left of the sprocket cover (near the starter motor). For a 19T, you'll need to grind off the left 1/4in of the sprocket cover, and a bit on the engine case. A 20T doesn't fit without major case grinding, and welding. |
![]() |
![]() |
#3 | |
Join Date: May 2024
Posts: 2
|
Thanks!
Quote:
|
|
![]() |
![]() |
#4 |
Join Date: Aug 2013
Posts: 130
|
If you get the 150, there's no need to swap out the chain. It's a decent chain. You can use the OEM chain all the way from a 13t to a 19t front with OEM rear, or a 30 to 38t with OEM front.
|
![]() |
|
![]() |
![]() |
|
|