New purchase questions -2006 Roketa 200cc DB-06 - Page 13

Landsvw · 08-04-2017, 09:33 PM

Quote:

Originally Posted by Ariel Red Hunter

That's good news. I don't know how many times I've brought up bad, or semi bad ground issues, but it has been a hard sell. The wiring on these bikes is tha absolue minimum guage to get the job done, in my opinion..ARH

I agree with you. The cable is very light gauge, and was probably 1/2 foot longer than it needed to be. Plus, no ground to the frame either. Is starting very well now! If it gets bad again I'm going to change the hot wire cables and the ground cable for heavier gauge/duty. I bet it will help a lot.

Landsvw · 08-04-2017, 09:40 PM

Quote:

Originally Posted by Landsvw

I agree with you. The cable is very light gauge, and was probably 1/2 foot longer than it needed to be. Plus, no ground to the frame either. Is starting very well now! If it gets bad again I'm going to change the hot wire cables and the ground cable for heavier gauge/duty. I bet it will help a lot.

Unfortunately I bought a new battery but oh well, it was new off eBay and wasn't too much. I'll save the other one for a backup. Any other bike (non Chinese) and it would have been the battery. Hahaha!

Landsvw · 09-17-2017, 04:36 PM

I put some generic Acerbis knock off brush guards on the Chinese bike...

Weldangrind · 09-26-2017, 11:22 AM

I have a similar set on each of my dual sports. One of them is scarred enough to prove that they work.

Landsvw · 09-26-2017, 11:21 PM

Quote:

Originally Posted by Weldangrind

I have a similar set on each of my dual sports. One of them is scarred enough to prove that they work.

They seem very good! And 1/3 the price of the labeled Acerbis.

Landsvw · 09-26-2017, 11:28 PM

Rode Chinese bike all over on Saturday - Just to blow out the cobwebs. Also, a co worker of mine who never rode before wanted to learn. So, for 45 minutes, he rode around a dirt track and learned the basics. Chinese bike is perfect for that! Sister arrives next week and hopefully we will go out and ride around. Should be fun.

Landsvw · 11-08-2017, 07:39 PM

Some updates. Probably going to sell the Roketa, or trade for a project. May post it in the classifieds. Nothing wrong, but want to kind of upgrade a little.

Really enjoying my klx250.

Finally, got my ttr225 in Alaska registered and plated through an interesting process involving another state. Pretty cool!

Raining and feeling like snow... season is close to an end I’m thinking...

Weldangrind · 11-09-2017, 11:49 AM

I'll bet that KLX is a fun bike. I'm looking forward to finishing my KLR250 and riding it.

Did you use the Vermont trick?

Landsvw · 11-09-2017, 12:17 PM

Quote:

Originally Posted by Weldangrind

I'll bet that KLX is a fun bike. I'm looking forward to finishing my KLR250 and riding it.

Did you use the Vermont trick?

Haha!

I had my doubts but for 75$ I figured it was worth a try... So, the TTR225 is officially street legal and now has a paperwork trail if I want to transfer it to Alaska or Oregon.

I'm working on buying some turn signals, a rear brake light and etc. to make it usable in town, etc. Since I only use it about 15 days a year, this will work out very well for me. I have some plans to ride around Alaska a bit more. Now I have to get my sister to get a licensed dual sport so she can join in.

Landsvw · 11-09-2017, 01:05 PM

Oh, there's a guy down here with a 2003 YZ125 in a basket... I mean completely disassembled... and, crank is seized and piston is melted. I may buy it and maybe use that for a winter project. Trying to think about how I could put a 4 stroke engine in it. Maybe the Roketa could donate parts and I'd have a street legal bike with a good suspension and frame, but a Chinese title... interesting possibilities

Weldangrind · 11-10-2017, 11:15 AM

I've had quite similar thoughts. If I could find a basket-case XL185, I'd drop a CG230 into it and convert the rear suspension to mono shock and the front to inverted forks. I have all of the necessary crap, other than a titled XL185 frame.

Landsvw · 11-10-2017, 04:30 PM

Quote:

Originally Posted by Weldangrind

I've had quite similar thoughts. If I could find a basket-case XL185, I'd drop a CG230 into it and convert the rear suspension to mono shock and the front to inverted forks. I have all of the necessary crap, other than a titled XL185 frame.

that's a nice idea. The YZ sold, so that one is gone... but I'll keep my eyes out for something similar.

Figure the CG engine is pretty good, but the Roketa/Shineray/Beta frame is kinda sub-par, so would be nice to have the Japanese quality.

Any of the monoshock big 3's from early 80's on would be a good candidate, if they could be titled.

Landsvw · 11-12-2017, 04:39 PM

Acquired this over the weekend, from my bro in law. For free. Probably sell or trade it. But man, it only weighs 190 pounds, and has usd forks! 1985 ktm125

No compression.

Had an epic ride on my bro in laws tw200 too. Really can climb almost anything.

Weldangrind · 11-16-2017, 11:31 AM

That KTM could be a fun four stroke recipient.
I love my little billy goat TW; I haven't ridden it for awhile.

Landsvw · 11-16-2017, 03:01 PM

Quote:

Originally Posted by Weldangrind

That KTM could be a fun four stroke recipient.
I love my little billy goat TW; I haven't ridden it for awhile.

I've decided against it, as the chain is on the wrong side, and the wheel can't be modified. the brake and the rear sprocket are on the same side....
so, would be a big undertaking. I 'think' I have a buyer for it, but not 100% sure yet...

09-26-2017, 11:22 AM	#184
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	I have a similar set on each of my dual sports. One of them is scarred enough to prove that they work. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	1

09-26-2017, 11:28 PM	#186
Landsvw Join Date: Jun 2016 Location: Myrtle Creek Oregon Posts: 873	Rode Chinese bike all over on Saturday - Just to blow out the cobwebs. Also, a co worker of mine who never rode before wanted to learn. So, for 45 minutes, he rode around a dirt track and learned the basics. Chinese bike is perfect for that! Sister arrives next week and hopefully we will go out and ride around. Should be fun. __________________ 1988 Kawasaki KLR250 1969 Honda Z50 silver tag 2002 Ford F-350 7.3 diesel 1975 Corvette 2017 Chevy Bolt “Throttle twisting geek” -LFN
	1

11-08-2017, 07:39 PM	#187
Landsvw Join Date: Jun 2016 Location: Myrtle Creek Oregon Posts: 873	Some updates. Probably going to sell the Roketa, or trade for a project. May post it in the classifieds. Nothing wrong, but want to kind of upgrade a little. Really enjoying my klx250. Finally, got my ttr225 in Alaska registered and plated through an interesting process involving another state. Pretty cool! Raining and feeling like snow... season is close to an end I’m thinking... __________________ 1988 Kawasaki KLR250 1969 Honda Z50 silver tag 2002 Ford F-350 7.3 diesel 1975 Corvette 2017 Chevy Bolt “Throttle twisting geek” -LFN
	0

11-09-2017, 11:49 AM	#188
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	I'll bet that KLX is a fun bike. I'm looking forward to finishing my KLR250 and riding it. Did you use the Vermont trick? __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	1

11-09-2017, 01:05 PM	#190
Landsvw Join Date: Jun 2016 Location: Myrtle Creek Oregon Posts: 873	Oh, there's a guy down here with a 2003 YZ125 in a basket... I mean completely disassembled... and, crank is seized and piston is melted. I may buy it and maybe use that for a winter project. Trying to think about how I could put a 4 stroke engine in it. Maybe the Roketa could donate parts and I'd have a street legal bike with a good suspension and frame, but a Chinese title... interesting possibilities __________________ 1988 Kawasaki KLR250 1969 Honda Z50 silver tag 2002 Ford F-350 7.3 diesel 1975 Corvette 2017 Chevy Bolt “Throttle twisting geek” -LFN
	1

11-10-2017, 11:15 AM	#191
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	I've had quite similar thoughts. If I could find a basket-case XL185, I'd drop a CG230 into it and convert the rear suspension to mono shock and the front to inverted forks. I have all of the necessary crap, other than a titled XL185 frame. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	1

11-16-2017, 11:31 AM	#194
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	That KTM could be a fun four stroke recipient. I love my little billy goat TW; I haven't ridden it for awhile. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0