Hawk 250 fender eliminator

[yoonit1]

Originally Posted by Megadan

If you didnt trash the stock rear fender I will happily take it off your hands.

I still have it, I cut the wires to the tail light pretty short but it's still usable

[Megadan]

The tail light wires don't bother me much. I am mostly interested in the rest of the fender section. I will shoot you a PM.

[robert0514]

Good morning, greetings from Puerto Rico
Recently I bought the same enduro rear fender and I don't have any clue how to install it (specifically the wiring). I want to know if someone can help me with the instructions, will be very appreciated.
Thnak you!

[Megadan]

Originally Posted by robert0514

Good morning, greetings from Puerto Rico
Recently I bought the same enduro rear fender and I don't have any clue how to install it (specifically the wiring). I want to know if someone can help me with the instructions, will be very appreciated.
Thnak you!

We can definitely try to help. It should be a lot easier than you are likely thinking it will be.

[robert0514]

Thank you for answering!
Black: negative
Blue: running light/tail light
Red: brake light
I want to know with which wires are supposed to be connected. There’s are green, green with yellow and brown wires.

[Megadan]

Going off of memory.

Green is Ground.
Green/Yellow Stripe is Brake.
Brown is running.

[robert0514]

And how can I connect the wires to the new ones?
There is a plug with the green, green/yellow and brown wire

[Megadan]

Originally Posted by robert0514

And how can I connect the wires to the new ones?
There is a plug with the green, green/yellow and brown wire

Simplest way would be to cut off the current connector and crimp on some weatherproof bullet connectors.

[dkennedy504]

whats up yall im new to this
i recently bought a 2020 hawk
and i was wondering if someone can tell me
how to take fender off so i can put the fender eliminator kit on

[Yung00]

Man that looks good . Great job