08-26-2008, 10:08 PM | #16 |
Join Date: Feb 2008
Posts: 392
|
Yeah its best to go with boots designed for bikes...the feet up to the knees are the most important part in controlling your bike and also the only parts of the body not visible to the rider, make sure your protected, I look at it this way if you were barefoot on a bike without a helmet and you tumbled your feet would not be able to support your body being thrown and you would certainly take a head shot.....if you had good boots they will offer support and you might not even hit your head at all!
Gloves are also important for grip and protection! |
|
08-27-2008, 09:18 AM | #17 |
Join Date: Aug 2007
Location: Tomball, TX
Posts: 382
|
I wear these from ACADEMY. $30 and they are comfy...
http://www.academy.com/index.php?pag...548-02157-6020 or you could go this route for $20. http://www.academy.com/index.php?pag...548-02157-6030
__________________
-2005 Sierra SR200- |
|
08-27-2008, 11:33 PM | #18 | |
Join Date: Nov 2007
Location: Southern Saskatchewan
Posts: 491
|
Quote:
__________________
"Sometimes it is better to say nothing, and let people think you're an idiot, than to open your mouth and prove it." |
|
|
08-28-2008, 05:19 AM | #19 | |
Join Date: Dec 2007
Location: New Zealand
Posts: 196
|
Quote:
|
|
|
08-28-2008, 06:44 AM | #20 |
Join Date: May 2006
Location: Fredericton, NB, Canada
Posts: 1,744
|
For street riding, MX boots are overkill IMHO. However, since I ride DS I'm looking for a set of ATV boots. Same protection as MX but with tread. I typically need more protection from the bike (ie. sharp pegs) than the terrain.
I also want to be able to walk around and MX boots are known to be a bit slippery (by design) particularly on wet surfaces.
__________________
Frostbite "The beatings will continue until moral improves" |
|
08-29-2008, 11:12 AM | #21 |
Join Date: Aug 2008
Location: idaho falls idaho
Posts: 118
|
are there any actual horror stories about the steel "cup" of steel toed boots cutting toes off durring an accident? i just couldn't see that happening.
|
|
08-29-2008, 05:31 PM | #22 |
Join Date: Nov 2007
Location: Tejas
Posts: 834
|
In a perfect world, we'll all wear specifically designed boots. But, in the real world, we can't. If I wear those boots to work, my feet is going to reek by the end of the day--not to mention everyone in the office staring at the boots. The best I can do is a pair of hiking boots.
__________________
Chinabikeless |
|
08-29-2008, 06:08 PM | #23 |
Join Date: Jul 2008
Location: Wheeling, West Virginia
Posts: 683
|
I have a few cheap pairs. One is non steel-toe, and another pair is cheapo Mac boots with steel toe.
I'm not pro or con against either, I just match the equipment to the mission. My problem is, the Mac steel-toe has a loose sole and I need to find out if it is worth the repair bill. I only paid about $35 at the mega-store. P.S. don't tell anybody, but I've been known to ride in running shoes :twisted: bene ambula et redambula, a safe journey to you, Tigertamer
__________________
07 H-D XL883C 06 LF 200GY-5 Yin and Yang CAUTION Obey The Traffic Regulation. Always Wear a Helmet. Don't Ride After Drinking Wine. Before Operation, Read The Owners Manual Carefully. |
|
08-29-2008, 06:48 PM | #24 |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
I know a few people that leave shoes at work to switch too during the day. I were boots for work so not much of a problem there.
Allen
__________________
You meet the nicest people on a Honda Clone. |
|
08-29-2008, 08:13 PM | #25 |
Join Date: Nov 2007
Location: N.E. Saskatchewan, Canada
Posts: 679
|
:!: A myth about steel-toe boots is that the inserts actually create a more dangerous environment, because a significant weight could cause the steel to act like a blade, severing the toe instead of the weight simply crushing the foot. However, the weight needed to induce such a failure would result in such severe damage to the toe that amputation would be necessary anyway. :!:
if you hit your toes hard enough to cut them with steel cap,how do you think they would look in running shoes or leather shoes...like new??? I agree with laces getting into pegs/shifters/brake...dangerous! With ANY leather boots tied up is better than none...if you are thrown off the bike chances are your feet are not going to be the most hurt. I would guess palms of hands,hips,shoulders and head would get some rash....As far as my own "scientific" test crashes have asertained... One crash tore /broke my laces and blew my workboot right off in the process of cartwheeling after the crash....My upper back and hip were rashed fairly bad and my knee hyperextended, but my foot left in a worksock fared well. (except for the thistle prickers)
__________________
'91 Yamaha Warrior- stage 2 '83 Honda ATC 70 '08 Yongjiang 125cc mx (Loncin) '08 Yongjiang 150cc atv (Jinlong) |
|
08-29-2008, 08:29 PM | #26 | |
Join Date: Jul 2008
Location: Wheeling, West Virginia
Posts: 683
|
Quote:
http://www.militaryclothing.com/IBS/...rchy/0S06.html I agree with the concept of the crushed toes also. I am not afraid of steel toe. There is an appropriate time for any protective equipment. use your judgment. :wink: Thanks, Tigertamer
__________________
07 H-D XL883C 06 LF 200GY-5 Yin and Yang CAUTION Obey The Traffic Regulation. Always Wear a Helmet. Don't Ride After Drinking Wine. Before Operation, Read The Owners Manual Carefully. |
|
|
08-29-2008, 08:31 PM | #27 |
Join Date: Apr 2007
Location: Toronto Ontario Canada
Posts: 2,585
|
warrior91 Myth Busted!
I think you're right on the mark. :wink: I only stated what I was told by my M2 instructor, steel toed boots made it hard, (maybe for newbies) to toe the shifter. Just what I was told.
__________________
IronFist ___________________________________ The "chain" of command is used for beating spammers. ___________________________________ |
|
08-29-2008, 09:24 PM | #28 | |
Join Date: Apr 2008
Location: Atlanta, Ga
Posts: 710
|
Quote:
If you ride a lot in a hiking boot, the shifting toe may wear out before the rest of the boot. I spent a ton of time on a bicycle as a kid, and one of the many lessons learned was avoiding chain tangle....be it from laces or pants. My boots are lace only, but I am very careful about the way I tie my boots, and how my pants fit. This is what I have for the street - http://www.motorcycle-superstore.com...Closeouts.aspx
__________________
2008 American Lifan LF200 GY-5 (930 km) - Sold 2007 Kawasaki EX250 - Sold 2006 Kawasaki EX650R - My new ride! 2005 Kawasaki EX250 - A new project |
|
|
08-29-2008, 09:46 PM | #29 |
Join Date: Feb 2008
Posts: 392
|
I think a steel toe boot would be ok but I wouldnt go out of my way to get them as they are pretty useless for bike riding and will likely just be an added obstacle in your way.I wouldnt like them as I like mobility in my feet while I ride, but to each is own!
|
|
08-29-2008, 09:56 PM | #30 |
Join Date: Jul 2008
Location: Wheeling, West Virginia
Posts: 683
|
there is a time for steel-toes, and there is a time for flip-flops (showers referred)... 8O
Leather helmets used to be the norm Now if I could just find a good cobbler in my neck of the hills! Tigertamer
__________________
07 H-D XL883C 06 LF 200GY-5 Yin and Yang CAUTION Obey The Traffic Regulation. Always Wear a Helmet. Don't Ride After Drinking Wine. Before Operation, Read The Owners Manual Carefully. |
|
|
|
|
|