|
![]() |
|
![]() |
|
Thread Tools | Search this Thread | Display Modes |
![]() |
#16 |
Join Date: Feb 2010
Location: Hartwell, GA
Posts: 187
|
I have a little bleed over on the opposite side of each turn signal when then are blinking. i didn't notice this until i tried it in the dark so I thought I needed them on each turn signal. thanks
__________________
Zongshen Sierra Mods: knock off DRC Edge II Taillight , FMF Turbine Core 2 Silencer, Halogen bulb, 18" Wheels, Real Tires |
![]() |
![]() |
#17 | |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
Quote:
![]() You clip the two wires going to the turn signal indicator, leaving about 1-inch of wire extending from the plug. Then you solder the two diodes to the two long wires coming from the wiring harness. Make sure the diodes are "pointing" toward the severed plug. ![]() ![]() Spud ![]()
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." ![]() 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
![]() |
![]() |
#18 |
Join Date: Feb 2010
Location: Hartwell, GA
Posts: 187
|
Thanks for the help!!!
That fixed it exactly. Sorry for the delay, I just got around it today. Alan
__________________
Zongshen Sierra Mods: knock off DRC Edge II Taillight , FMF Turbine Core 2 Silencer, Halogen bulb, 18" Wheels, Real Tires |
![]() |
![]() |
#19 | |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
Quote:
![]() Spud ![]()
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." ![]() 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
![]() |
|
![]() |
![]() |
|
|