What did you BUY today? - Page 9

2LZ · 07-09-2016, 09:54 AM

Quote:

Originally Posted by BlackBike

As the pennies fall right thru that head pipe (you know the question plz confirm)

was this $110. may have to pull trigger if it gets ups hp.

It's the 138.00 version at the top of the page in the link. I needed the spark arrestor here in CA....but now I see some others advertise the spark arrestor also. Go figure..........

http://www.ebay.com/sch/Silencers-Mu...rue&rmvSB=true

BlackBike · 07-09-2016, 07:08 PM

Quote:

Originally Posted by 2LZ

It's the 138.00 version at the top of the page in the link. I needed the spark arrestor here in CA....but now I see some others advertise the spark arrestor also. Go figure..........

http://www.ebay.com/sch/Silencers-Mu...rue&rmvSB=true

You will be good to add the 15 to that and be done with it for your purposes. +spark arrest. Still OK considering rust free solution too.

willy dog · 07-10-2016, 11:16 AM

a snow flap for the arctic cat sled hope this winter is better than last

wheelbender6 · 07-10-2016, 02:36 PM

Bought a feeler gauge for 7 bucks to adjust my valves at Autozone. I already had feeler gauges, but not as small as 0.08mm.

BlackBike · 07-12-2016, 04:03 PM

spoke wrench spud and human being approved
http://www.chinariders.net/showthrea...t=spoke+wrench
http://www.ebay.com/itm/381539810692

rear wheel assembly for bashan db 07
http://www.roketapartsdept.com/produ...-7281-391.html

Its only monnnneeeeyyy

NOT SURE IF IT WAS THE CAUSE BUT GOING FORWARD, KEEP CHECKING THOSE RIM SPOKES

BlackBike · 07-31-2016, 11:20 PM

mini patch pump tool kit
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

Spark plug
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

Bruce's · 09-02-2016, 07:05 PM

I picked up a Mac tools Macsimiser 42" top tool chest ,And a small mother load of generators .1000 watt Honda ,1500 watt Honda ,2600 watt Yamaha ,and 3000 watt Makita from a fellow I met a few months back and refer to him as my "brother" because we literally have the exact same kind of junk .I paid a whopping $350.00 Canadian ( about $200.00 US ) for all of that .My buddy was with me and he bought a Makita 5500 watt generator,2013 model for$60.00 ! ,his needs an ignition coil though .I also picked up a nice little Lincoln mig pack 10 with gas kit for $80.00 .

**cheesy** · 09-02-2016, 08:16 PM

Company bought me lunch!

Bruce's · 09-02-2016, 08:35 PM

Quote:

Originally Posted by cheesy

Company bought me lunch!

Any company I get just drinks my beer ,you scored !

BlackBike · 09-03-2016, 12:16 AM

Quote:

Originally Posted by Bruce's

I picked up a Mac tools Macsimiser 42" top tool chest ,And a small mother load of generators .1000 watt Honda ,1500 watt Honda ,2600 watt Yamaha ,and 3000 watt Makita from a fellow I met a few months back and refer to him as my "brother" because we literally have the exact same kind of junk .I paid a whopping $350.00 Canadian ( about $200.00 US ) for all of that .My buddy was with me and he bought a Makita 5500 watt generator,2013 model for$60.00 ! ,his needs an ignition coil though .I also picked up a nice little Lincoln mig pack 10 with gas kit for $80.00 .

I guess this is coming off the downturn in the oilfields?

pete · 09-03-2016, 02:45 AM

yeasterday ....
a full power bomb exhaust for the boys bike...
Be a couple weeks till it gets here from Procycle....

And put a big bore kit / cam / CDI in the basket....
maybe... maybe not... we will see..

..

**cheesy** · 09-11-2016, 10:14 PM

A late thirties, early forties Art Deco bookcase in mahogany.

Neighbor had it at their garage sale and were asking $25. I offered $20 and a jar of Mrs.Cs' homemade Bread and Butter Pickles. They'd had a jar of the little dandies the night before and countered with "Just give us three jars of pickles and we're good."

Mrs.C is making good use of her retirement.

Bruce's · 09-16-2016, 05:51 AM

That's a real nice cabinet .

**cheesy** · 09-16-2016, 08:55 AM

A new Duluth Trading opened by us yesterday. I've never spent so much for a pair of jeans.

If they are to be believed, it may be the last pair I ever buy.

2LZ · 09-16-2016, 09:47 AM

Quote:

Originally Posted by cheesy

A new Duluth Trading opened by us yesterday. I've never spent so much for a pair of jeans.

If they are to be believed, it may be the last pair I ever buy.

Please don't tell me you'll be pole dancing in your new underwear...... ;-)

07-10-2016, 11:16 AM	#123
willy dog Join Date: Oct 2015 Location: vermont Posts: 238	a snow flap for the arctic cat sled hope this winter is better than last __________________ Peace and Zong Life
	0

07-10-2016, 02:36 PM	#124
wheelbender6 Join Date: May 2015 Location: Houston area Posts: 1,902	Bought a feeler gauge for 7 bucks to adjust my valves at Autozone. I already had feeler gauges, but not as small as 0.08mm. __________________ "Its not WHAT you ride; its THAT you ride"
	0

07-12-2016, 04:03 PM	#125
BlackBike Join Date: Feb 2016 Location: George West, Texas Posts: 4,097	missing spokes and busted rim hole solution spoke wrench spud and human being approved http://www.chinariders.net/showthrea...t=spoke+wrench http://www.ebay.com/itm/381539810692 rear wheel assembly for bashan db 07 http://www.roketapartsdept.com/produ...-7281-391.html Its only monnnneeeeyyy NOT SURE IF IT WAS THE CAUSE BUT GOING FORWARD, KEEP CHECKING THOSE RIM SPOKES __________________ ***************************************** 2015 Bashan"Blaze" BS250GY-31 (DB-07K-250) GONE 2017 Suzuki V Strom 650 XT "We are all born ignorant, but one must work hard to remain stupid." ~Benjamin Franklin~ Last edited by BlackBike; 07-12-2016 at 08:14 PM. Reason: �� Ⱥ
	0

07-31-2016, 11:20 PM	#126
BlackBike Join Date: Feb 2016 Location: George West, Texas Posts: 4,097	For my future mini adventures mini patch pump tool kit https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 Spark plug https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 __________________ ***************************************** 2015 Bashan"Blaze" BS250GY-31 (DB-07K-250) GONE 2017 Suzuki V Strom 650 XT "We are all born ignorant, but one must work hard to remain stupid." ~Benjamin Franklin~
	0

09-02-2016, 08:16 PM	#128
cheesy Moderator Join Date: Jul 2010 Location: Elburn, IL Posts: 5,844	Company bought me lunch! __________________ Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts
	2

09-02-2016, 07:05 PM	#127
Bruce's Join Date: Apr 2015 Location: Sudbury ,Ontario Posts: 855	I picked up a Mac tools Macsimiser 42" top tool chest ,And a small mother load of generators .1000 watt Honda ,1500 watt Honda ,2600 watt Yamaha ,and 3000 watt Makita from a fellow I met a few months back and refer to him as my "brother" because we literally have the exact same kind of junk .I paid a whopping $350.00 Canadian ( about $200.00 US ) for all of that .My buddy was with me and he bought a Makita 5500 watt generator,2013 model for$60.00 ! ,his needs an ignition coil though .I also picked up a nice little Lincoln mig pack 10 with gas kit for $80.00 .
	1

09-03-2016, 02:45 AM	#131
pete Join Date: Jan 2012 Location: ChCh , NZ Posts: 2,262	yeasterday .... a full power bomb exhaust for the boys bike... Be a couple weeks till it gets here from Procycle.... And put a big bore kit / cam / CDI in the basket.... maybe... maybe not... we will see.. .. __________________ 09 XT660R ... 06 TTR250 ... 80 Montesa H6 125 Enduro... 77 Montesa Cota 348 MRR "Malcom Rathnell Replica"... Current resto projects.. 81 Honda CT110... 80 Kawasaki KL250A1... 11 Husaburg TE125 enduro... "sold" along with another 31... Lifan 125 Pitbike.. "stolen" ... KIWI BIKER FORUM...... http://www.kiwibiker.co.nz/forums/content.php All the best offroad rides in NZ... http://www.remotemoto.com/ E-mail... xtpete1@gmail.com
	0

09-11-2016, 10:14 PM	#132
cheesy Moderator Join Date: Jul 2010 Location: Elburn, IL Posts: 5,844	A late thirties, early forties Art Deco bookcase in mahogany. Neighbor had it at their garage sale and were asking $25. I offered $20 and a jar of Mrs.Cs' homemade Bread and Butter Pickles. They'd had a jar of the little dandies the night before and countered with "Just give us three jars of pickles and we're good." Mrs.C is making good use of her retirement. __________________ Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts
	2

09-16-2016, 05:51 AM	#133
Bruce's Join Date: Apr 2015 Location: Sudbury ,Ontario Posts: 855	That's a real nice cabinet .
	0

09-16-2016, 08:55 AM	#134
cheesy Moderator Join Date: Jul 2010 Location: Elburn, IL Posts: 5,844	A new Duluth Trading opened by us yesterday. I've never spent so much for a pair of jeans. If they are to be believed, it may be the last pair I ever buy. __________________ Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts
	0