06-28-2015, 04:14 PM | #1 |
Join Date: Dec 2014
Location: Deerfield Beach FL
Posts: 1,410
|
Old School Shock Adjustment
My bike has these old school rear shocks. The shock appears to be adjustable by twisting the shock to the different notches. I tried to twist by hand and it won't budge. Do I need a special tool? The notch it is in now, is that the firmest setting or the softest setting?
Thanks / |
|
06-28-2015, 04:25 PM | #2 |
Join Date: Dec 2014
Location: Deerfield Beach FL
Posts: 1,410
|
Well I just ran across this. It is certainly inexpensive enough so I ordered it.
http://www.ebay.com/itm/161669229927 / |
|
06-28-2015, 05:26 PM | #3 |
Join Date: Sep 2014
Posts: 1,913
|
That is set on the softest setting. You can use a big channel lock pliers to turn it or the right tool which is what you have ordered.
|
|
06-28-2015, 05:27 PM | #4 |
Join Date: Dec 2014
Location: Deerfield Beach FL
Posts: 1,410
|
Thanks Mud
/ |
|
06-29-2015, 01:20 AM | #5 |
Join Date: Jan 2015
Location: Phoenix, AZ
Posts: 267
|
You have the correct type of tool, just make sure that it fits as shocks come with different diameter collars. Adjusting the collar will be easier with the back wheel off the ground and the weight off the suspension.
__________________
George 2016 CanAm Spyder F3-L |
|
06-29-2015, 10:11 AM | #6 |
Moderator
Join Date: Jul 2010
Location: Elburn, IL
Posts: 5,959
|
What every body said.
However, I found that the spanner that came with my new Progressive shocks to be too short to be useful. In it's stead, I found that a Sugino Bicycle Bottom Bracket Lock Ring Tool to be the cats patootie. http://thumbs4.ebaystatic.com/d/l225...NF3XB7oZWw.jpg I wouldn't go out of my way to hunt one down, just if you come across one cheap, snag it.
__________________
Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts |
|
06-29-2015, 11:28 AM | #7 |
Join Date: Dec 2014
Location: Deerfield Beach FL
Posts: 1,410
|
Thanks guys.
/ |
|
06-29-2015, 11:49 AM | #8 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
I just put a heavy pair of gloves on and twist it by hand. I do that while the shock is mounted to the bike, so I'm not trying to hold the shock at the same time. Don't rest on the seat while trying to turn it, because you'll apply more pressure to the spring.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
07-07-2015, 09:31 PM | #9 |
Join Date: Jul 2015
Posts: 5
|
Id say thsts the softest setting. If it wont budgr with s spanner wrench double check that its actually made to be adjusted. I have found some chinese parts lare made to look like they do something that they dont. Usually functional quality is good but they just use a little window dressing
|
|
07-07-2015, 09:37 PM | #10 |
Join Date: Dec 2014
Location: Deerfield Beach FL
Posts: 1,410
|
Yep my wrench arrived and I did adjust the shocks. I went to the stiffest position and the bike almost jarred me off the seat. I backed the shocks off one position and feels really good. I was surprised how much difference the little adjustments made.
/ |
|
07-08-2015, 12:14 AM | #11 |
Join Date: Feb 2015
Location: TENNESSEE
Posts: 392
|
Glad that worked out and you could find your happy place. :-D
__________________
" If it ain't broke, I can probably still fix it!" ---- Tim Allen |
|
07-08-2015, 11:38 AM | #12 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
What kind of bike is that, Adjuster?
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
07-08-2015, 01:37 PM | #13 |
Join Date: Dec 2014
Location: Deerfield Beach FL
Posts: 1,410
|
Thats my Chinabike Honda Cub clone. I am getting ready for some new mods. Already installed a 125cc motor. Now I am getting ready to do a forward carb mount and a new fuel tank. And a UNI 2 stage filter. I am really having problems with the exhaust. I need to find a performance exhaust for the 125cc engine. Right now I am using the original 49cc exhaust and I am concerned it is too restrictive. When I get the mods done I will post a new video. My new tank already arrived but they sent the wrong color, I ordered chrome and they sent black. Still waiting on the carburetor rotating adapter and air filter. The bike was perfectly fine when it arrived in a box at my front door. But man I love messing with this stuff.
http://www.chinariders.net/showthread.php?t=14447 / |
|
07-09-2015, 12:49 AM | #14 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
I'm with you! I can't leave stuff alone.
I'm interested in your entire project, but mostly the forward carb mount.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
07-09-2015, 09:43 AM | #15 |
Join Date: Dec 2014
Location: Deerfield Beach FL
Posts: 1,410
|
Weld I am using one of these for the carb. It allows you to index the carb in almost any position you want. The forward mounted carb is mainly for looks but I might get better performance because now my intake manifold will be much shorter.
http://www.ebay.com/itm/161686498458...S:1123&vxp=mtr / |
|
|
|
|
|