Black Mystery Plates RPS ASSEMBLY

zendick · 05-18-2018, 06:11 PM

I can understand the confusion. They are stiffeners for the fender. They are needed. The front fender is not stiff enough for offroad or highway speeds without them.

Look at where you have the fender bolted in now. you see the bolts? Take them out on one side. Place the plate with the holes down and line up the bolt holes. Rebolt in fender with bolts. repeat on other side.

I know the plastics look unpainted but all the magicians I have seen are.

05-18-2018, 06:11 PM	#9
zendick Join Date: May 2018 Posts: 32	I can understand the confusion. They are stiffeners for the fender. They are needed. The front fender is not stiff enough for offroad or highway speeds without them. Look at where you have the fender bolted in now. you see the bolts? Take them out on one side. Place the plate with the holes down and line up the bolt holes. Rebolt in fender with bolts. repeat on other side. I know the plastics look unpainted but all the magicians I have seen are.
	1