TT250 parts interchangeable with Hawk??

jet321 · 02-08-2017, 01:39 PM

Are the body panels on the TT250 interchangeable with the hawk 250? Specifically the rear cover?

It looks to have the same bolt pattern but I'm not sure. I'm looking to replace the rear cover due damage and it seems relatively inexpensive to replace if it's the TT250 part.

http://www.cscmotorcycles.com/TT250-...VER-s/357.html

http://www.therps.net/DB-Hawk.html

Has anyone had experience ordering parts, in general, for the TT250 and using them for the Hawk?

chuck · 02-08-2017, 05:55 PM

Quote:

Originally Posted by jet321

Are the body panels on the TT250 interchangeable with the hawk 250? Specifically the rear cover?

It looks to have the same bolt pattern but I'm not sure. I'm looking to replace the rear cover due damage and it seems relatively inexpensive to replace if it's the TT250 part.

http://www.cscmotorcycles.com/TT250-...VER-s/357.html

http://www.therps.net/DB-Hawk.html

Has anyone had experience ordering parts, in general, for the TT250 and using them for the Hawk?

I replaced the seat with the tt250 aftermarket one ,it fits perfectly.

hertz9753 · 02-08-2017, 06:45 PM

I know somebody here combined the two piece side panel with front half from a TT250 and the back half from the Hawk.

hertz9753 · 02-08-2017, 07:32 PM

I found his thread and the pictures.

http://www.chinariders.net/showpost....4&postcount=66

Ichrisbot · 02-08-2017, 11:01 PM

Yes, the only thing I've found really different are the wiring harnesses. The connectors and wire colors don't line up between the Hawk and TT250, all the body, frame, and hardware parts I've gotten from CSC fit on the Hawk with no issues.

mjstef · 02-08-2017, 11:27 PM

Quote:

Originally Posted by Ichrisbot

Yes, the only thing I've found really different are the wiring harnesses. The connectors and wire colors don't line up between the Hawk and TT250, all the body, frame, and hardware parts I've gotten from CSC fit on the Hawk with no issues.

Yup! Wiring AND speed sensor is different.....

jet321 · 02-15-2017, 09:24 PM

What about spokes? I have a few that are broken on my rear wheel. I was going to order everything at once, but I've found a few threads that say the TT250 spokes don't fit, idk if that's still true. I appreciate all of your responses guys!

02-08-2017, 01:39 PM	#1
jet321 Join Date: Apr 2016 Posts: 100	TT250 parts interchangeable with Hawk?? Are the body panels on the TT250 interchangeable with the hawk 250? Specifically the rear cover? It looks to have the same bolt pattern but I'm not sure. I'm looking to replace the rear cover due damage and it seems relatively inexpensive to replace if it's the TT250 part. http://www.cscmotorcycles.com/TT250-...VER-s/357.html http://www.therps.net/DB-Hawk.html Has anyone had experience ordering parts, in general, for the TT250 and using them for the Hawk? __________________ 2015 Hawk 250 ~ Aftermarket Exhaust/K&N/LED everything/16/44T/Shinko 705's
	0

02-08-2017, 06:45 PM	#3
hertz9753 Join Date: May 2016 Location: Bismarck, ND Posts: 868	I know somebody here combined the two piece side panel with front half from a TT250 and the back half from the Hawk. __________________ 2015 and 3/4 RPS Hawk 250. Most people would call it a 2016 but the MCO didn't.
	0

02-08-2017, 07:32 PM	#4
hertz9753 Join Date: May 2016 Location: Bismarck, ND Posts: 868	I found his thread and the pictures. http://www.chinariders.net/showpost....4&postcount=66 __________________ 2015 and 3/4 RPS Hawk 250. Most people would call it a 2016 but the MCO didn't.
	0

02-15-2017, 09:24 PM	#7
jet321 Join Date: Apr 2016 Posts: 100	What about spokes? I have a few that are broken on my rear wheel. I was going to order everything at once, but I've found a few threads that say the TT250 spokes don't fit, idk if that's still true. I appreciate all of your responses guys! __________________ 2015 Hawk 250 ~ Aftermarket Exhaust/K&N/LED everything/16/44T/Shinko 705's
	0

02-08-2017, 11:01 PM	#5
Ichrisbot Join Date: Sep 2015 Posts: 108	Yes, the only thing I've found really different are the wiring harnesses. The connectors and wire colors don't line up between the Hawk and TT250, all the body, frame, and hardware parts I've gotten from CSC fit on the Hawk with no issues.
	1