View Full Version : What I've been up to...
BillR
12-02-2010, 07:59 PM
Finishing up on the house...
New kitchen island...built by yours truly
before finishing:
http://i435.photobucket.com/albums/qq71/raineswn/SANY0061.jpg
All done:
http://i435.photobucket.com/albums/qq71/raineswn/Island_Finished.jpg
Few more things to do, then I get to start tinkering on the bikes... :!:
Bill R
FastDoc
12-02-2010, 09:17 PM
Beautiful work, Bill! How many hours do you have in that project? Did you do it by yourself or did you have help?
Looks great, very nice work :)
Weldangrind
12-02-2010, 11:39 PM
Excellent! Did you use a 9" overhang? That's what I'm doing. Countertop guy will be here on Monday.
Holy cow! That's beautiful work! 8O
Ok...gotta keep Mrs. 2LZ off the site for a while. :lol:
SpudRider
12-03-2010, 09:17 PM
You did a beautiful job, Bill. Thank you for sharing the photos. :)
Spud :)
BillR
12-03-2010, 09:33 PM
Did you use a 9" overhang?
This one is 11 inches. Planning to put some brackets on for a bit of extra support.
The missus ordered it. Not sure if she specified that much overhand.
I just picked it up and put it on... :wink:
Beautiful work, Bill! How many hours do you have in that project? Did you do it by yourself or did you have help?
If I had worked straight thru...approx 20hrs...spread out over 2 weekends.
Did this one all by myself with some "strategic" help...youngest son for lifting help when I could pin him down and a friend at work who is "tool geek"...table saw, biscuit router, clamps, sanders...you name it.
Works weekends, so he couldn't help.
Used 3/4 inch red oak almost straight from the mill. It had been dried and surface planed. All I had to do was cut the boards to size and put it together :lol:
Kinda made a "kit" first, then assembled. Saved a lot of "Doh!! didn't cut that right!" 8O
Thanks for the comments, all. It was fun. I was kinda worried it might not turn out so good, pleasantly surprised.
Bill R
PS: Soon to come...pulling the clutch cover and checking the gear play for the balance shaft... :o Pics as I go along. Might be useful for the 200cc balancer engines...
BR
vBulletin® v3.8.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.