Changing GY6 Scooter Clutch Springs
 

https://www.youtube.com/watch?v=pHZRKpWsmoE
This technique worked very well. Ice pick is one option. Heat tip on a stove element to bend angle if desired.

http://i.imgur.com/Oyo5oSH.jpg?1

http://i.imgur.com/RYH1q6y.jpg?1

http://i.imgur.com/voHGu1m.jpg

Source . . clutch springs . . contra spring

http://i.imgur.com/xV8kzwI.jpg

Re-grease torque driver while clutch is disassembled. Walmart Super Tech grease works fine.

Placing a loop of 5/32" Teflon valve packing (hardware store plumbing department) in the spring base may ease the twisting movements.

http://i.imgur.com/qMgUqqS.jpg

De-glaze pads and inner bell surface with some type of abrasive.

http://i.imgur.com/TMEZNEE.jpg

Bad clutch bearing and related videos (Honda Elite 110 scooter).

https://www.youtube.com/watch?v=Yb48eRiJwGU

Nicely documented! I'm a long way from needing it but I'll know where to come back to for info.

Thanks, Tortoise!