06-29-2013, 01:29 PM | #1 |
Join Date: Feb 2010
Posts: 21
|
Replacement bulbs for instrument panel
Does anybody know what replacement bulbs will work for the Zong GY-2 200 Sierra?? The bulbs for the 3 panel lights (neutral, hi beam, & turn signal) and the speedo illumination lights are 12v, wedge base bulbs. One takes a 1.7w and the other a 3w. Not sure what size the base is though?
Eiko makes a 3w bulb with a T3.25 base...this looks like it would work for one of them. http://www.elightbulbs.com/Eiko-4223...ive-Light-Bulb If I can't find something then I'll have to order them thru Nestor. Thx |
|
06-30-2013, 03:15 AM | #2 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
My Zongshen 200GY-2 employs 194/168/912 size, wedge base bulbs for the instruments and indicator lights. Apparently, the T3.25 bulb is the same size.
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
07-01-2013, 09:05 AM | #3 |
Join Date: Jan 2013
Location: Germany
Posts: 231
|
I have changed the the control lights on my bike. My Skyteam also had those 1.3W - 12v bulbs. I could barely see them during the day and I lost a cap too. So I put different lamp holders and 12V/DC 3W bulbs, which work fine. I bought them from a electronics Katalog.
Here is a video of it:
__________________
My CB : http://www.youtube.com/watch?v=ZbZ8q-grmOQ 2012 Skyteam V-Raptor 250 2011 Yamaha Tenere XT 660Z abs 1996 Kawasaki Vulcan 800 Classic 1989 Kawasaki GPZ 500 |
|
07-01-2013, 08:07 PM | #4 |
Join Date: Feb 2010
Posts: 21
|
I ordered a pack of 10 3w bulbs online so I'll give those a try.
|
|
07-02-2013, 02:58 AM | #5 |
Join Date: Feb 2011
Location: Australia
Posts: 341
|
@Trailbikeryder You've done a professional job with those little control lights, fantastic!
__________________
Zongshen 200gy-2 |
|
07-02-2013, 03:04 AM | #6 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
Get 'er done!
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
07-02-2013, 03:04 AM | #7 | |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
Quote:
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
|
07-02-2013, 08:29 AM | #8 |
Join Date: Jan 2013
Location: Germany
Posts: 231
|
__________________
My CB : http://www.youtube.com/watch?v=ZbZ8q-grmOQ 2012 Skyteam V-Raptor 250 2011 Yamaha Tenere XT 660Z abs 1996 Kawasaki Vulcan 800 Classic 1989 Kawasaki GPZ 500 |
|
07-02-2013, 12:14 PM | #9 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Trailbikeryder, the lights and panel look very good. Perhaps a small bit of silicone on the threads of the light covers would prevent them from unscrewing while you ride.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
07-02-2013, 05:52 PM | #10 |
Join Date: Jan 2013
Location: Germany
Posts: 231
|
@Weld
good idea, Thanks for the tip. The front end does vibrate a lot.
__________________
My CB : http://www.youtube.com/watch?v=ZbZ8q-grmOQ 2012 Skyteam V-Raptor 250 2011 Yamaha Tenere XT 660Z abs 1996 Kawasaki Vulcan 800 Classic 1989 Kawasaki GPZ 500 |
|
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|