08-09-2011, 04:50 PM | #1 |
Join Date: Nov 2009
Posts: 10
|
gio 50 no fire when hot
I have a 50 cc Giovanni atv which has a copy of the old honda 50cc engine. It works perfect for about 20 min. and then it quits and there is no fire at the plug. If I leave it for approx. 1/2 hour it will start up again and work fine for another 20-30 min. Is there some overheat protection system built into these or what could be the problem. Sometimes it works fine for longer periods but this has been happening for over a year now. I tried a new plug and the same thing happens. I have it geared down with larger rear sprocket and smaller front one but also have the throttle limited to approx. half of normal travel. Thanks for any help.
|
|
08-09-2011, 05:51 PM | #2 |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
Really not much to the ignition system. My guess would be a CDI box or the coil itself. Both of these are cheap and easy to get.
Coils will give those symptoms. |
|
08-14-2011, 08:38 PM | #3 | |
Join Date: Sep 2008
Location: Surrey, B.C., Canada
Posts: 2,185
|
Quote:
All relatively cheap and easy to change. As Kato mentioned, I'd start with the CDI. |
|
|
08-22-2011, 12:31 AM | #4 |
Join Date: May 2009
Location: SASKATOON
Posts: 1,161
|
no spark
I would say you coil is getting hot and crapping out when hot.... when it does this... coil it down with water or blow cool air from a compress on the coil... and it this helps ,... then you know it is the coil... or just change the coil... and see .. tehy are cheap
__________________
DEALER FOR ZSTAR & GIO PRODUCTS, TAOTAO ABIBABA ATV ETC |
|
|
|
|
|