|
|||||||
|
|
 |
|
|
Thread Tools | Search this Thread | Display Modes |
|
|||||||
|
|
|
|
|
|
Thread Tools | Search this Thread | Display Modes |
09-17-2013, 05:55 PM
|
#1 |
|
Join Date: Sep 2013
Posts: 2
|
Hensim/Phoenix/Wildfire 250cc 253FMM Cruiser Twin Carbs
Hey everyone, I just got this Wildfire Cruiser for free. Can't beat free. I cut off the mufflers and added a better free flowing filter. Does anyone know the stock jet settings??? I have been all over the internet looking and I had seen 95/38 and 88/35. I need to know where to start. I figure if it is a 95, with the enginebreathing so easily, maybe try a 105 or so per carb? Any ideas?
Thanks, Adam |
|
|
09-17-2013, 09:09 PM
|
#2 |
Join Date: May 2007
Location: Altamont, Kansas
Posts: 15,103
|
Welcome. I know that we have a few members with this bike. What kind of carb does it have? Have you removed the carb yet? I don't know if the China ones are stamped with the size.
Also what elevation do you ride at?
__________________
You meet the nicest people on a Honda Clone. |
|
|
|
09-18-2013, 01:18 AM
|
#3 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Got pics of your new bike?
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
|
|
09-18-2013, 08:08 PM
|
#4 |
|
Join Date: Sep 2013
Posts: 2
|
There are two Keihin carbs. Here is a picture of the left hand one from the side. I have taken them both out a multitude of times to clean them. But as far as I know, I want to say they're same spec as the Aussie version of the Rebel motor with two carbs. I ride at sea level, too.
|
|
|
|
|
|
|
|
|
Linear Mode
