New 167fmm oil cooling and big bore kit suppler

ozzioutlaw · 02-11-2015, 10:06 AM

Hi guys just bought a secondhand atv with a 167fmm engine, took it for a spin was reasonably happy with it but would love to set an oil cooler up ASAP as I'm going out with mates riding all day in 35-40 degree days but duno where to start, I would also like a bit more of a bore rather than the standard 229cc. I'd love any feed back if possible thanks guys

Weldangrind · 02-11-2015, 11:52 AM

It depends upon the stud spacing, but if you want to convert to water cooled, you can go as high as 270cc. That would negate your need for an oil cooler.

I've also seen a big bore kit on Taobao that takes a 67mm bore to 72.5mm. Again, it would depend on stud spacing.

02-11-2015, 10:06 AM	#1
ozzioutlaw Join Date: Feb 2015 Location: Perth Posts: 2	New 167fmm oil cooling and big bore kit suppler Hi guys just bought a secondhand atv with a 167fmm engine, took it for a spin was reasonably happy with it but would love to set an oil cooler up ASAP as I'm going out with mates riding all day in 35-40 degree days but duno where to start, I would also like a bit more of a bore rather than the standard 229cc. I'd love any feed back if possible thanks guys
	0

02-11-2015, 11:52 AM	#2
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	It depends upon the stud spacing, but if you want to convert to water cooled, you can go as high as 270cc. That would negate your need for an oil cooler. I've also seen a big bore kit on Taobao that takes a 67mm bore to 72.5mm. Again, it would depend on stud spacing. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0