db-27...aftermarket parts? - Page 2

katoranger · 01-08-2008, 11:39 AM

coleary15, we are just giving you a hard time.

There is not muffler bearings, kanuter valves, blinker fluid, piston return springs, etc.

The airfilter and opening up the exhaust and a carb rejet are about all the performance mods these engines will probably be able to handle.

Allen

coleary15 · 01-08-2008, 03:51 PM

oh...wow and i believed you guys..ive only been into dirtbikes since i was 12(2 years) so im still finding things out....slowly...i bought a uni pod filter...thats all ive done...

katoranger · 01-08-2008, 05:33 PM

Have you lowered the needle in the carb to the lowest point?

Also you will probably need to turn the fuel screw out some.

If you modify the exhaust at all you are going to need to install a larger main jet in the carb for more fuel. This will give you a noticable power increase.

Red is a good source here and Teamcheap has done similar mods. My bike still has the stock parts on it.

Allen

coleary15 · 01-08-2008, 07:22 PM

what kind of jets should i get 4 my bike....can i order jets 4 a chinese carb?

ejcycles · 01-08-2008, 07:25 PM

Well Excuse me... We happen to like to have some fun once in a while too. Well Kelly what is your age? So your calling me an a__hole because we had some fun and you think he didn't know we where kidding/pulling his chain.
Plenty have pulled mine here and I just laugh along with them. One can't be that darn serious all the time there is fun to be had in life too. If Chris/coleary15 thinks we where being rude or misleading I Will be The First to Apologize and say I am Sorry.

coleary15 · 01-08-2008, 07:28 PM

no ur fine i just want sure...sum1 i was talking 2 last week at my local shop told me that i could buy exhaust bearings..haha wow that was a weird conversation...

ejcycles · 01-08-2008, 07:31 PM

Hi Chris
I have Main Jets in stock that will fit your carburetor... If you want PM me your phone number and we can sit and I'll explain a lot of this to you.

coleary15 · 01-08-2008, 07:34 PM

sounds good...later ill call u cause im tied up right now...not literally...haha

kelly5150 · 01-08-2008, 08:04 PM

Oh EJ,
he didn't know you were kidding , and you are an a-hole. Any questions ?
Being an a-hole is not a bad thing, I know , I am one too. Just thought I would help the guy out. I have been messed with here too, when I was trying to post pics on the serious side of life, but you guys had to mess with me and it cost me hours of BS, so bloody well right, I thought I would at least let the guy in on the joke. I like to have fun too, but come on man .

I am 41 by the way , old, crotchetty and mean, so watch yourself , and I mean that. I have a great sence of humor and what you guys do is not humor, it is screwing with some poor guys head and that aint cool . I speak for me and I did not appreciate it. Enough said, rebuttles calmly are always welcome .

Cheers, Kelly

ChiGongJitsu · 01-08-2008, 09:21 PM

I just wanted to see if the "kanuter valve" joke was more than just an ohio thing. Didn't mean to cause anybody any grief! Plus i made sure to put "lol, i couldn't resist".

I would never lie to someone and be serious about it!

I think everybody needs to be busted by a "kanuter valve" joke once in their lives lol j/k have a great day guys

ejcycles · 01-08-2008, 09:48 PM

Hi Kelly

I must admit, well no questions and Thank you for The Promotion to: Admiral @__hole 9th Class! I'm working very hard to become 1st Class and I will be there very soon! :wink: and get better every day. I'm almost 46 and older than dirt, just as mean & crotchety as they come and full of @!$$ & vinegar. By the way I was not one that got on you about posting pics in the forum... heck, I wouldn't, I don't even have a clue how so I put them in my gallery and post the link to the pic in the gallery. A little fun is a little fun and it would have all come out in the wash. This young person would have known it in the end and been laughing along with the rest of us and had ammunition to use on others!
Have fun!, God Bless!, and Keep the Rubber Side Down!.

ambassador · 01-08-2008, 10:03 PM

Kelly5150,
This is a family friendly site and would appreciate if you would refrain from threats or political views... If that's the way you are, that's fine, take it to TTalk... Thank you, Ambassador...

oncedead · 01-08-2008, 10:22 PM

but did he repalce the Henway Yet?

kelly5150 · 01-09-2008, 03:50 AM

OOps, the E-Gastappo got me again .

Sorry guys, I get a little fiesty once in awhile, I will try better , and I apologize . Yes, the political stuff was not good for this Dirt Forum . The Hillary stuff either , my bad. A threat ? Huh ? Ok fine , that too I guess ?

Darn that was hard . I am man, I can change, if I have to , probably .

Cheers, Kelly5150 Lunatic on the loose ! :twisted:

katoranger · 01-09-2008, 08:51 AM

Chris, order your parts from Bruce. He will get you the right ones and has the expertise to help you tune it.

The jets for keihin carbs fit.

Allen

01-08-2008, 11:39 AM	#16
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	coleary15, we are just giving you a hard time. There is not muffler bearings, kanuter valves, blinker fluid, piston return springs, etc. The airfilter and opening up the exhaust and a carb rejet are about all the performance mods these engines will probably be able to handle. Allen __________________ You meet the nicest people on a Honda Clone.
	0

01-08-2008, 03:51 PM	#17
coleary15 Join Date: Jan 2008 Posts: 127	wow oh...wow and i believed you guys..ive only been into dirtbikes since i was 12(2 years) so im still finding things out....slowly...i bought a uni pod filter...thats all ive done...
	0

01-08-2008, 05:33 PM	#18
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	Have you lowered the needle in the carb to the lowest point? Also you will probably need to turn the fuel screw out some. If you modify the exhaust at all you are going to need to install a larger main jet in the carb for more fuel. This will give you a noticable power increase. Red is a good source here and Teamcheap has done similar mods. My bike still has the stock parts on it. Allen __________________ You meet the nicest people on a Honda Clone.
	0

01-08-2008, 07:22 PM	#19
coleary15 Join Date: Jan 2008 Posts: 127	setup what kind of jets should i get 4 my bike....can i order jets 4 a chinese carb?
	0

01-08-2008, 07:25 PM	#20
ejcycles Join Date: Oct 2006 Location: 11481 State Route 44 Mantua, Ohio 44255 Posts: 1,112	Well Excuse me... We happen to like to have some fun once in a while too. Well Kelly what is your age? So your calling me an a__hole because we had some fun and you think he didn't know we where kidding/pulling his chain. Plenty have pulled mine here and I just laugh along with them. One can't be that darn serious all the time there is fun to be had in life too. If Chris/coleary15 thinks we where being rude or misleading I Will be The First to Apologize and say I am Sorry. __________________ Thanks, Bruce @ Endless Journey Cycles "Phone Calls Only" ~330-274-0098~ Hours: Tue.-Fri. 10:00-6:00 Sat. 10:00-4:00 EST. Dealer for: Lifan, Crossrunner ATVs. http://www.endlessjourneycycles.net
	0

01-08-2008, 07:28 PM	#21
coleary15 Join Date: Jan 2008 Posts: 127	no ur fine i just want sure...sum1 i was talking 2 last week at my local shop told me that i could buy exhaust bearings..haha wow that was a weird conversation...
	0

01-08-2008, 07:31 PM	#22
ejcycles Join Date: Oct 2006 Location: 11481 State Route 44 Mantua, Ohio 44255 Posts: 1,112	Hi Chris I have Main Jets in stock that will fit your carburetor... If you want PM me your phone number and we can sit and I'll explain a lot of this to you. __________________ Thanks, Bruce @ Endless Journey Cycles "Phone Calls Only" ~330-274-0098~ Hours: Tue.-Fri. 10:00-6:00 Sat. 10:00-4:00 EST. Dealer for: Lifan, Crossrunner ATVs. http://www.endlessjourneycycles.net
	0

01-08-2008, 07:34 PM	#23
coleary15 Join Date: Jan 2008 Posts: 127	sounds good...later ill call u cause im tied up right now...not literally...haha
	0

01-08-2008, 08:04 PM	#24
kelly5150 Join Date: Nov 2007 Posts: 446	Oh Ej Oh EJ, he didn't know you were kidding , and you are an a-hole. Any questions ? Being an a-hole is not a bad thing, I know , I am one too. Just thought I would help the guy out. I have been messed with here too, when I was trying to post pics on the serious side of life, but you guys had to mess with me and it cost me hours of BS, so bloody well right, I thought I would at least let the guy in on the joke. I like to have fun too, but come on man . I am 41 by the way , old, crotchetty and mean, so watch yourself , and I mean that. I have a great sence of humor and what you guys do is not humor, it is screwing with some poor guys head and that aint cool . I speak for me and I did not appreciate it. Enough said, rebuttles calmly are always welcome . Cheers, Kelly
	0

01-08-2008, 09:21 PM	#25
ChiGongJitsu Join Date: Sep 2007 Location: Ohio Posts: 315	I just wanted to see if the "kanuter valve" joke was more than just an ohio thing. Didn't mean to cause anybody any grief! Plus i made sure to put "lol, i couldn't resist". I would never lie to someone and be serious about it! I think everybody needs to be busted by a "kanuter valve" joke once in their lives lol j/k have a great day guys
	0

01-08-2008, 09:48 PM	#26
ejcycles Join Date: Oct 2006 Location: 11481 State Route 44 Mantua, Ohio 44255 Posts: 1,112	Hi Kelly I must admit, well no questions and Thank you for The Promotion to: Admiral @__hole 9th Class! I'm working very hard to become 1st Class and I will be there very soon! :wink: and get better every day. I'm almost 46 and older than dirt, just as mean & crotchety as they come and full of @!$$ & vinegar. By the way I was not one that got on you about posting pics in the forum... heck, I wouldn't, I don't even have a clue how so I put them in my gallery and post the link to the pic in the gallery. A little fun is a little fun and it would have all come out in the wash. This young person would have known it in the end and been laughing along with the rest of us and had ammunition to use on others! Have fun!, God Bless!, and Keep the Rubber Side Down!. __________________ Thanks, Bruce @ Endless Journey Cycles "Phone Calls Only" ~330-274-0098~ Hours: Tue.-Fri. 10:00-6:00 Sat. 10:00-4:00 EST. Dealer for: Lifan, Crossrunner ATVs. http://www.endlessjourneycycles.net
	0

01-08-2008, 10:03 PM	#27
ambassador Join Date: Jan 2007 Location: Bradenton, Florida Posts: 1,200	Kelly5150, This is a family friendly site and would appreciate if you would refrain from threats or political views... If that's the way you are, that's fine, take it to TTalk... Thank you, Ambassador... __________________ 06 Lifan 200 GY-5
	0

01-08-2008, 10:22 PM	#28
oncedead Join Date: Aug 2007 Location: Lemoyne, Pennsylvania Posts: 46	but did he repalce the Henway Yet?
	0

01-09-2008, 03:50 AM	#29
kelly5150 Join Date: Nov 2007 Posts: 446	oops, busted again ! OOps, the E-Gastappo got me again . Sorry guys, I get a little fiesty once in awhile, I will try better , and I apologize . Yes, the political stuff was not good for this Dirt Forum . The Hillary stuff either , my bad. A threat ? Huh ? Ok fine , that too I guess ? Darn that was hard . I am man, I can change, if I have to , probably . Cheers, Kelly5150 Lunatic on the loose ! :twisted:
	0

01-09-2008, 08:51 AM	#30
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	Chris, order your parts from Bruce. He will get you the right ones and has the expertise to help you tune it. The jets for keihin carbs fit. Allen __________________ You meet the nicest people on a Honda Clone.
	0