09-25-2016, 10:46 PM
|
#1 |
|
Join Date: Aug 2016
Posts: 54
|
help with a mikuni clone carb
Hello, I posted this in the dirt forum too but seems to be better traffic here and the same part sooo here goes. I have an apollo 250cc motorcycle and I changed out the carb to a mikuni clone but I need to re jet it to 110 and a 25 or 30 pilot. I cannot find anything for a vm 26. I have bought the ones that look like they will work but they get here and are different style of jets that don't fit. I went to the mikuni site and they have vm 22 and vm 28 no 26 though.... I need a link to jets that you have bought for your mikuni clone that work. Thanks in advance!
|
|
|
09-25-2016, 11:00 PM
|
#2 |
Join Date: Jan 2016
Location: Mooresville NC
Posts: 2,049
|
This is the one I bought for my hawk 250:
http://www.ebay.com/itm/30MM-MIKUNI-...item4d24b26648 this site might be helpful to you: http://www.pjmotorsports.com/mikuni-jets.html for main jets, I got N100.604 - mine is jetted at 117.5 but I need to lower it to probably 112.5 I used Mikuni VM28/486 Pilot Jet. I can't speak to a VM26 or the apollo though. I'm sure others will chime in. Hope this helps. good luck! |
|
|
|
09-25-2016, 11:16 PM
|
#4 | |
Join Date: Jun 2016
Location: akwesasne, NY-13655
Posts: 2,220
|
Quote:
|
|
|
|
|
09-25-2016, 11:32 PM
|
#5 |
|
Join Date: Aug 2016
Posts: 54
|
Yeah I believe this is the same carb I have. Measurements look the same.
|
|
|
|
09-26-2016, 11:15 AM
|
#6 | |
|
Join Date: Jun 2016
Location: akwesasne, NY-13655
Posts: 2,220
|
Quote:
|
|
|
|
|
09-26-2016, 02:20 PM
|
#7 | |
|
Join Date: Jan 2016
Location: Mooresville NC
Posts: 2,049
|
Quote:
the links to the jets where the ones I got too. you can find them all on the other website I posted too. Sorry for confusion.... |
|
|
|
|
09-26-2016, 04:00 PM
|
#8 | |
|
Join Date: Jun 2016
Location: akwesasne, NY-13655
Posts: 2,220
|
Quote:
|
|
|
|
|
|
|
 |
|
|
Linear Mode
