|
06-19-2018, 11:53 PM | #1 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
The pics could be deceiving, but it doesn't look like aluminum to me. Does a magnet stick to it?
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
|
06-21-2018, 11:04 AM | #2 |
Join Date: Apr 2009
Posts: 114
|
Good observation I will check, I was mainly looking at how clean the tacks were. Ill check.
__________________
Much Rather be ridin |
|
06-21-2018, 01:39 PM | #3 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,574
|
You could probably use a rotary tool and cut the tack weld and just replace the bolt. If you don't have a welder you could just use a nut with a lock washer and tighten it in place.
__________________
2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
|
|
|
|